Will the 1" lift bodymounts from WH work on a fullsize?

They are a smaller Diameter and use a 7/16 bolt.
you would have to drill them out and re sleve them

anybody know of a 1" Body lift available for fullsizes?

chris85xlt just made his

Any word on how, or a writeup? I'd like to do this for clearance and working on my truck much easier but did he just use a hard puck with the regular body mount on top or what? :confused:

Buddy of mine used hockey pucks for his full size GMC three years ago. Just drilled a hole through the middle and they still look good today. they are like 1"thick x3" diameter. Think he paid like $3 each.

Dave Blue has one on his Bronco not sure how many inches I think only 1 or 2

Dave Blue has one on his Bronco not sure how many inches I think only 1 or 2
2"

On my old Fullsize, I just replaced the bushings, and got close to 3/4 inch of lift

aside from the front most bushings, they are all in pretty good shape,

Couldn't you just cut the 2" pucks in half? Use a hose clamp around the middle as a guide and cut away;)

how about just getting a 1" thick chunk or Steel and drilling a hole in it?

i took a aluminum rod 3" in Dia. cut them to 1 inch pucks then drilled a hole in the center. bought some bolts that are 1" longer and done. total cost was like $45 which includes the metal and having someone cut it, nuts and bolts