PDA

: lost my york pulley bolt, what is it?

kidwired
02-16-2002, 06:24 PM
does anyone know what size and thread this should be? I need a replacement.
kodak
02-16-2002, 07:40 PM
Come awn. j/k

it aint that big. 3/8 maybe less. can't say for sure. Kilby would know for sure.
kidwired
02-16-2002, 10:37 PM
man there aint no pnps on sonoma, not a single yard.
The bolt is a 5/16" fine thread (24 to be exact), not sure on the length. I'd guess an inch or so. Torque to 25 - 30 ft lbs

thanks Kendo :D
Pin Head
02-16-2002, 10:44 PM
If you are talking about removing the clutch and pulley on a York compressor, it is 5/8 coarse thread. It is a big mutha.
kidwired
02-16-2002, 11:05 PM
Originally posted by Pin Head
If you are talking about removing the clutch and pulley on a York compressor, it is 5/8 coarse thread. It is a big mutha.

hhmmmm I already pulled the clutch and pulley thats how I lost the bolt lol and it was not 5/8

york manual http://www.onboardair.com/york_manual/toc.html
kodak
02-17-2002, 11:33 AM
Guess I can go out to. open my hood and take out that bolt and messure it. Fawk that is alot of work.
Victor
02-17-2002, 11:39 AM
Have you been to pull and save in Windsor? They are cheap and pretty good. actuially 3 junkyards next to each other there. Also Creams, by the Santa Rosa airport
kidwired
02-17-2002, 02:25 PM
dont worry bout it kodak , thanks tho, somebody probably has 1 on a bench right now. maybe I'll shoot a not to brad k.

this would be easier if my threads werent buggered but as it is I'm not sure waht to jam in there.
kodak
02-17-2002, 02:47 PM
how about using a dippstick. messure the depth of the threaded hole. a nail or something like that should give the length. So there you go...
kidwired
02-19-2002, 08:02 PM
woohoo!!!
its 5/16 24, armed w/ that I was able to find the original bolt w/ mangled threads and run a #5 nut on it to get the threads cleaned up. and I tapped the york to get those threads back. I dont know what happened but hey it's all back together now.

Kilby reply to my email!!