|
bigranes79gmc 02-28-2005, 11:08 AM im tryin to decide witch lift to go with. rite now the truck is a daily driver but not for long. if i choose the 6 inch what extra parts do i need other than the lift. im pretty sure im pickin up a set of stainless extended brake lines for the front and back if needed but i hear people talking about a trans drop bracket is that needed ? im tryn to keep it reliable to, :confused: any suggestions? thundr undrgrond 02-28-2005, 11:54 AM u shouldnt need to lower the tranny at all with either lift 78 K5 02-28-2005, 01:49 PM What tire are you planning on runnin? bigranes79gmc 02-28-2005, 11:06 PM im planning on runnin a 36 or 37'' maybe 38 if i get a good deal 78 K5 03-01-2005, 09:29 AM I run 38.5 on a 6inch and love it. I trimmed the fenders a little but only because when I really flexed it out the tires were catching. I'd go with the 6in, that way if you wanna go bigger in the future, you can. Remember you still have that 1/2 ton crap underneath your rig, so don't go too big or :nuke: sethzilla 03-01-2005, 09:42 AM make sure your kit comes with a steering arm as well. and if you go 6" you'll have to extend the front driveline. I'm running a 6" lift with 39.5's with some front trimming but none in the rear<----i have a flatbed :D :evil: SETHZILLA! loweredK5 03-01-2005, 10:19 AM I have a set of 3/4 ton running gear with 3.73 gears f/r that I need to get rid of if you are interested in going a little stronger...I have a set of 8 lug wheels to go with them. email me if interested... thanks Michael pyro31152@aol.com 78 K5 03-01-2005, 02:21 PM OOO OOO Me Me!! I sent you an email, very interested in the front 3/4 ton sunny 03-01-2005, 10:36 PM i have a 6" lift and 35" tires . i didn't need to modify anything....my kit came with a steering arm chevy8u 03-02-2005, 07:31 PM I put that 1" square in between the trans mount and the frame and also put blocks to lower the draglink up in front | |