|
: New power plant for the buggy Rockrat 03-01-2005, 03:42 PM 4.3 vortec should be finished buiding it tonight to install into the chassis http://img.photobucket.com/albums/v260/rock4x/motor001.jpg http://img.photobucket.com/albums/v260/rock4x/motor002.jpg RgdL 03-01-2005, 05:19 PM So the buggy won't sound like a diesel anymore? That 1.6L you ran in it at the Badlands sounded sooooo sick. :D Can't wait to see how the whole 4.3 swap kit ends up Scott. Does the basic kit you will be marketing come into play at all with the buggy or is it so non-suzuki anymore that it doesn't apply? AFTERMARKET4X4 03-01-2005, 05:30 PM If it runs as good as it looks....... Sean 95geo 03-01-2005, 05:45 PM how long are the yota axles going to last? OKIE ZUK 03-01-2005, 06:30 PM What are you going to do with all that horsepower? :eek: Rockrat 03-01-2005, 08:46 PM how long are the yota axles going to last? The Yotas should hold up just fine... Rockrat 03-01-2005, 08:47 PM What are you going to do with all that horsepower? :eek: I didnt do it for the HP. I did it for the xtra weight to help roll it back onto its wheels instead of stoping on its side..LOL zukzilla4x4 03-02-2005, 05:37 AM :laughing: :laughing: :laughing: JbMotorSports04 03-06-2005, 06:29 PM nice 4.3, what trans are you going to be using? stock or GM? good luck :smokin: Rockrat 03-06-2005, 08:47 PM nice 4.3, what trans are you going to be using? stock or GM? good luck :smokin: I have a 4L60E adapted to dual toy cases, Heres a shot of the pass header I just made, Now to start the dr. side. http://img.photobucket.com/albums/v260/rock4x/Headers001.jpg http://img.photobucket.com/albums/v260/rock4x/Headers002.jpg http://img.photobucket.com/albums/v260/rock4x/Headers004.jpg http://img.photobucket.com/albums/v260/rock4x/Headers003.jpg Carolina_Zuk 03-08-2005, 06:22 AM sweet! Now back to work! junkyard joe 03-08-2005, 07:25 AM so where did ya get the 3 primary collectors, i just made my own out of and old 4 primary collector, not nearly as pretty as yours, joe Rockrat 03-08-2005, 09:00 AM so where did ya get the 3 primary collectors, i just made my own out of and old 4 primary collector, not nearly as pretty as yours, joe Stahl header bogger61 03-08-2005, 03:14 PM If you use single plates at head how are you going to keep them from twisting when you weld Rockrat 03-08-2005, 04:11 PM If you use single plates at head how are you going to keep them from twisting when you weld I welded each inavidually, then pressure tested, remounted to head and tacked the 3 pipes together right before the collector. Removed as one assembly and finish welded. Things line up ok after but not exactly, so I took the torch, with everything bolted tite and heated all the tubes equal and let cool. Now when i take them off they are perfect. bogger61 03-09-2005, 12:39 PM On race car header we would put flat strap on top and bottom,the heating trick works well also,They really look great | |