: NP205 Full and Partial REBUILD KITS!


NorthWestFab
03-02-2005, 11:29 PM
We carry full and partial rebuild kits for you 205, weather you just want to freshen things up, or completely rebuild a worn unit, we've got your parts!

http://www.northwestfab.com/images/NWF%20003.jpg

Our Seal and gasket kit comes with all the input and output seals, as well as all the paper gaskets needed for a NP205. The kit is $39.00

http://www.northwestfab.com/images/NWF%20005.jpg

Then we have the full rebuild kit, which includes all the seals and gaskets, along with all the bearings needed to completly rebuild your NP205. These kits go for $189.00 and you need to specify large or small bore.

-Kyle

NorthWest Fab

55 guy
03-04-2005, 07:36 PM
you guys have some nice products for the 205 !! the dodge diesel boys are looking for the early 89- 93 manual transmission to the 205 xcase adapter no longer avaibale might be a big market for them ??? check out the TDR board ??? or pm me for more INFO thanks for makeing this stuff !!

Sapper
03-05-2005, 04:50 PM
FINALLY...someone is doing this.... and a bonus too now no brokerage fees...( :flipoff2: UPS :flipoff2: )

I will be calling very, VERY soon for a full rebuild kit for my Ford 205...

NorthWestFab
03-07-2005, 07:36 PM
FINALLY...someone is doing this.... and a bonus too now no brokerage fees...( :flipoff2: UPS :flipoff2: )

I will be calling very, VERY soon for a full rebuild kit for my Ford 205...


Cool man, We've got them on the shelf.

Yeah, borders suck :mad3:

Sapper
03-08-2005, 04:48 AM
What about 203 reduction box kits?

NorthWestFab
03-09-2005, 05:30 PM
The 203 range boxes are fairly simple animals, just clean and re-pack the needles in the idler, a new bearing in the input and output, and new seals. I'll PM you a price

NorthWestFab
03-10-2005, 11:09 AM
Our NP203 Range Box Rebuild kits are $125.00, include a new input bearing, output bearing, needle bearings, seals and gaskets.

Sapper
03-11-2005, 05:00 PM
Great guys to deal with. Looking forward to dealing with them again.

Jay

ih4ever
03-15-2005, 07:40 PM
do you guys happen to sell the 32 spline kits for converting a chevy 27 male to the 32 spline female model out of the th400?

NorthWestFab
03-15-2005, 09:39 PM
We sure do - got em on the shelf - $169 for just the gear, but I recommend going for the Gear, Bearing, and input seal for $204. These are brand new units.

PM'd you too.

-Kyle

Sapper
03-25-2005, 04:48 PM
WOW. Very impressed with speed. GREAT product, and I will definatly deal with them again.

fatrhino
04-08-2005, 11:51 AM
any kits for a np208?

Hammerlock
04-08-2005, 12:59 PM
I need one of those 32 spline inputs for my Ford NP205. Can I reuse the ford input shaft bearing?

NorthWestFab
04-09-2005, 01:31 PM
I need one of those 32 spline inputs for my Ford NP205. Can I reuse the ford input shaft bearing?

Yes, the Ford and chev 32 spline inputs share the same bearing. th400 gear alone is $125.

I'm looking into a 208 kit, thanks for the suggesgion.

NorthWestFab
04-28-2005, 01:45 PM
Bump! :smokin:

Our New Shop # 250 248 6024 ! Rebuild Kits are IN STOCK!

TOYOTAMIKE
05-09-2005, 12:52 PM
I need to convert my np205 to a fixed yoke rear do you have the parts readily available???

NorthWestFab
05-09-2005, 01:50 PM
Yes we do, on the shelf and ship same day.

To place order call us at the shop 250-248-6024

Jordan
Northwestfab

broncobuster37
05-09-2005, 02:10 PM
I got one of their NP208 rebuild kits and have never had better customer service, will use again for sure.

bike guy
05-10-2005, 11:49 PM
how can i tell without removing the unit (divorced) if i have a large or small bore?

thanks

NorthWestFab
05-10-2005, 11:54 PM
Divorced are all small bore input bearings.

-Kyle

SlamChops
07-09-2005, 02:32 PM
are th350 version 205s the small bore also?

NorthWestFab
07-09-2005, 04:55 PM
Your correct the TH350 versions are all small bore

Northwestfab

SlamChops
07-11-2005, 10:56 PM
how much do they have to be bored to be able to accept the bigger bearings? any exact measurement i can take to my machinest?

NorthWestFab
07-12-2005, 10:44 AM
The actual diamter of a small bore bearing is 80mm, the larger bearing is 90mm, the machinist will have to remove 5mm.

90mm works out to 3.543" I would spec from 3.543-3.545, but make sure you have a bearing on hand to test fit has he goes.

NorthWestFab
12-26-2005, 04:12 PM
Bump, Next day shipping

NorthWestFab
10-31-2008, 11:18 AM
We also do rebuild kits for your transmission, and many transfer cases ! Give us a shout !

UNDERCONSTRUCTION
11-07-2008, 07:49 PM
I need a rebuild kit for an AX-5 out of a 91 wrangler. what all comes in the kit and what is the price?

NorthWestFab
11-19-2008, 02:35 PM
They're availible /w syncro's for $229, or without for $189.

RT 4X4
03-01-2009, 02:26 AM
do you sale a 46re trans rebuild kit for a 99 dodge dakota rt?

86Chevyon1Tons
03-18-2009, 08:39 AM
I have a later model gm 205. It is mated with to a 400. I'm sure you are going to ask me if it has a big or little bearing right? I need a full rebuild kit shipped to 48836. I am hopping to get the kit and then pull the case but I can pull it before if needed. Thanks

NorthWestFab
05-14-2009, 12:26 PM
Thanks for the Orders.

big specht
05-17-2009, 05:42 AM
Con you guys get a 203 input shaft ??? I'm going to try to put a gm 203 behind a c6 , can't seem to find any ford 203 up this way:shaking:

1GMC4x4
06-07-2009, 11:16 PM
I need to get a partial rebuild kit sent to 95123.


Thanks
Will be ordering this week

bad luck
06-12-2009, 01:23 AM
how much for a full kit for dodge diesel manual 205

NorthWestFab
06-12-2009, 04:55 PM
$169 for NP205 form a diesel.

bad luck
06-12-2009, 07:04 PM
i will be needing it next month

NorthWestFab
07-14-2009, 02:08 PM
Right on, let me know.

mike_verwey
10-07-2009, 08:35 AM
i have a 2wd C6 tanny and i want to put my 205 tansfer case behind it. you dont happen to have the correct tailshaft and/or the adaptor or know where i could find one do you?

NorthWestFab
10-07-2009, 10:29 AM
I've got C6-205 adaptor housing for $69ea, but I don't have any C6 tailshafts. the NP205 tailshaft is the most common length. Most larger auto trans builders should have a core supply. If you cannot find one, let me know I can get one for you.

-Kyle.

funk_1964
10-12-2009, 03:26 PM
do you have clocking plates for the racetrack 205? i have been pointed in your direction twice now and i havent seen anythin on your site
thanks!

NorthWestFab
10-12-2009, 07:26 PM
do you have clocking plates for the racetrack 205? i have been pointed in your direction twice now and i havent seen anythin on your site
thanks!

Nope, we don't make em. Duffy (d.d machine) is the only one that I know of.

chevalade
10-12-2009, 07:34 PM
How about rebuild kits for the getrag 360 out of a 93 dodge diesel?

funk_1964
10-12-2009, 07:44 PM
Nope, we don't make em. Duffy (d.d machine) is the only one that I know of.

is he out of (pirate) buisness?
all the threads are at least a year old, how do i get ahold of him, does he have a site?