: EZ-Locker install question?


Mark '73 FJ40
02-18-2002, 08:58 PM
With one tire jacked up and the other on the ground is my EZ-Locker supposed to ratchet??
Kinda defeats the purpose of a locker doesn't it?

The cover is still off and there is no gear oil in it.........
I put new side gear shims in.

oh yeah and c-clips suck. :flipoff2:

Pin Head
02-18-2002, 09:14 PM
Originally posted by Mark '73 FJ40
With one tire jacked up and the other on the ground is my EZ-Locker supposed to ratchet??



It might or it might not depending on the position of the center pin in relation to the "driver" for the wheel that is on the ground. You need to test it with both tires off the ground. If you hold one tire forward, the other side should ratchet backwards. If you hold one tire backwards, the other side should ratchet forward.

Niether tire can go slower than the ring gear when driven on the "drive" side of the ring gear gear and niether tire can go faster than the ring gear when the pressure is on the coast side of the ring gear.

They only lock both sides when one is slipping. Otherwise, one tire is ratcheting. For such a simple looking device, their operation is quite complex.

Valentine
02-18-2002, 09:28 PM
Originally posted by Mark '73 FJ40
oh yeah and c-clips suck. :flipoff2:

I'll have to agree with you there! Just Installed my Lockrite yesterday. Got them from Hank (sixsranch) a while back, and decided it was time to install it....

Thank you Hank!!!

Nick

Mark '73 FJ40
02-18-2002, 09:35 PM
Excellent.... thanks. :smokin:

It turned so easily I was sure I must have screwed something up.