Like the title says, I'm looking for the WMS to WMS measurement front and rear for a 71 or so(My buddy isn't entirely sure what year it is, but, it's that body style) 3/4 ton. Truck was a 350/4 speed unit, apparently has a 14 bolt out back, and he thinks it's a 44 in front, not entirely sure though. I'd just grab a tape and go measure, but, the truck is sitting about an hour from here. Just doing a bit of research for him... These axles might end up under an EB of all things...

Should be 69.5" wms-wms.
I'm not sure on the wms of the 14 bolt, I think its 67", but you'll have to check the 14 bolt bible. Anyway, that axle is not stock...it may still have the stock D60 rear, or the Eaton. I have an Eaton rear that measures 65", but its from a 2wd 3/4 ton, and I've never measured the stock rear 60 under my truck, but I could run out there and check if you need.

http://www.pirate4x4.com/tech/billavista/14b_bible/index.html