fordperf351w
03-30-2005, 05:07 PM
What pinion seal is used on a 9" with a N housing and a daytona pinion support. Not sure if it's same as stock (79 bronc)
|
fordperf351w 03-30-2005, 05:07 PM What pinion seal is used on a 9" with a N housing and a daytona pinion support. Not sure if it's same as stock (79 bronc) Quick & Dirty 03-30-2005, 08:20 PM The seal is the same. The inner bearing is larger with the daytona, but the pinion gear and yoke are the same as standard. fordperf351w 03-30-2005, 09:32 PM I knew the I.D. of the seal was the same as standard, wasn't sure if the O.D. of the seal was the same. XJ_ranger 03-31-2005, 08:14 AM if its the same - then the part number is 7044NA... at least that is the seal that i replaced in the 76 f-150 9" that i run... | |