thanks,
manny

manny, you gonna run those on your rig?

Glen,
I'm already running 55 rears in the back - they are 2.5" lift.

I am looking to improve my shackle angles before Rubithon and thought about upgrading the rears to 4" (and move the 2.5" to the front - already have SR).

TPI's web-site listed true spring lift 55 springs, and got my hopes up this morning :(

A few fellow cruisers have already recommended alcanspring.com
manny

manny. expect about 3 weeks before you get your springs, so I would hurry up and order.
also, if youre going to do an alcan order, dont limit yourself to 55 spring dimensions. Using 55 rears in the front may be longer than you need. You only need another inch or 2 to fix you angle, so you may want to consider a custom length spring. They will be able to make springs that are to the OEM front 40 springs specs, just longer.

cheers-
Dustin

FWIW, I had great results from my Iron Man 55 springs from $pecter. Not sure if you can get them seperatly :confused:
I ran the 2.5inch lift on my soa 55 with my 60/14 bolts and never had an issue. The rears are a very heavy duty spring but flexed well.