Need A Source for 406/416 Axles,preferably near Southern Oregon,say a day's drive 300 miles(?).Will go further if needed. :confused:

I will also be very willing to do buiness over distance if I can get good info on parts interchange.May need to retube to work with project.Need 6.5 gearing and LOTS of strength!

Thanks for any help!!

Krynos

http://www.dansunimogs.com/406axlesforsale.htm

www.exaxt.ca is up in canada, but rob and mac are both very helpful.

www.exaxt.ca is up in canada, but rob and mac are both very helpful.


:smokin: I second that as well....

www.exaxt.ca is up in canada, but rob and mac are both very helpful.
3X

Taradon...?I have tried looking for a site address but no luck.

I hear that Taradon has a disc brake conversion that will allow me to use standard 1 ton wheels... 406/416 compatible!!Anyone have any experience with these or are they too new?

Thanks for the replies as always!!!

Krynos

exaxt's kit uses standard ford 1 ton brakes. 8 on 6.5 pattern and my 16.5's fit on no problem.

Not far to the South of you is www.expedition-imports.com also. Scott is a great guy!

http://www.rockymountainmoggers.com/links.html has tons of dealer links also!

HaWiiLuVeR-Thanks for the info on the Exact hub conversion!! :D :D

unimogken-Thank you for the links!!I'll check those out. :)

Everyone else- thanks as well!!I have contacted Exact and they have told me that they have run out of sources for those axles!! :(