PDA

View Full Version : PolyBushings (a few different sizes)

TJ Fan
04-26-2005, 02:24 PM
Here are some of the bushings we manufacturer and use at Mad4wd.

Black Poly Bushing (smaller of the two):
- 9/16" Bore
-Gold Zinc Plated Sleeve.
- 2.850" Long, 1.880" Dia. and .188 Wall Thickness (3/16") DOM.
Price: 10.00 per assy.

Red Poly Bushing (larger of the two):
- Available in TWO bore sizes: 9/16" and 5/8"
-Thick Gold Zinc Plated Sleeves.
3.250" Long, 2.250" Dia and .188" Wall Thickness (3/16") DOM.
-Beefy :D ...they weigh 1.5 lbs per bushing.
Price: 15.00 per assy.

Qty pricing is available.

Please call MAD4WD @ 330-549-9082

Thanks,
Larry
BrettM
04-26-2005, 03:40 PM
are they the same "hardness"?
TJ Fan
04-26-2005, 03:59 PM
BrettM,
Yes, one is just larger than the other. We use the larger one when we make control arms out of 2.00" OD. There is a lot more material to take abuse on the larger ones. The edges are also beveled on the large bushings so they will line up and slip in and out of the tabs easier.

thanks
Larry
1972CJ5+1
05-13-2005, 10:09 PM
Does this include the DOM, or is it just the bushings and sleeve? These would work perfect on my transmission crossmember.
BrettM
05-14-2005, 01:12 AM
it includes the DOM, isn't that obvious from the description (and pictures)?
1972CJ5+1
05-14-2005, 08:46 AM
It looks pretty obvious, but since I was going to go with a larger bushing than I have been using, I was inquiring as to if I also needed to purchase an additional size DOM. Are you affiliated with this company, or just a freelance comment maker? If you are, thanks for the info. If not, why do you feel you have to grunt at everybody that walks by your cage? This isn't the tech section. I should be able to ask a vendor a question, even if you think it is a stupid one, without your input. If the vendor thinks I am a dumbass, let him tell me. :rolleyes:
BrettM
05-14-2005, 02:42 PM
It looks pretty obvious, but since I was going to go with a larger bushing than I have been using, I was inquiring as to if I also needed to purchase an additional size DOM. Are you affiliated with this company, or just a freelance comment maker? If you are, thanks for the info. If not, why do you feel you have to grunt at everybody that walks by your cage? This isn't the tech section. I should be able to ask a vendor a question, even if you think it is a stupid one, without your input. If the vendor thinks I am a dumbass, let him tell me. :rolleyes:
I am not affiliated with the vendor, but I bought a few of the small ones from him last week.
SlamChops
05-15-2005, 05:12 PM
can i get a quote on four 5/8" bushings sets to 36605
BrettM
05-15-2005, 08:45 PM
can i get a quote on four 5/8" bushings sets to 36605
these guys don't do the quote by PM or post thing, CALL them and you will get great service.
SlamChops
05-16-2005, 07:26 PM
word. i'll hit em up tomorrow then. 'preciate it. :D
TJ Fan
05-18-2005, 04:07 PM
Slamchops,
Hit us up @ 330-549-9082

Thanks,
Larry
SlamChops
05-19-2005, 07:40 PM
i ordered mine today. thanks again! :D
TJ Fan
11-08-2005, 09:34 AM
:D

Thanks,
Larry
Mad4wd
02-22-2006, 09:40 AM
Our Poly Bushing kits are now accompanied by greasable grade 8 bolts, and a little pretty zert cap. Give us a call on sizing and pricing, and if you have any other questions. Tanner---330-549-9082
Mad4wd
11-16-2006, 02:56 PM
Use these with our greaseable bolt kits (http://www.pirate4x4.com/forum/showthread.php?t=561370)

http://www.madmfg.com/images/greasablebolts.jpg