opinions please.

[trkklr77]

i put a well built moderate 350 in a few months ago. i used a rv cam,roller rockers, timing gears, edlb profmer, 700 holley, accel dist, and so on

i ran the cam at 0* of addvance/retard, would it be worth the effort to run up to 4* addvance/retard?

its not hard to change it, just want to know if it will make a difference with the smallish cam and light upgrades.

[Skedar2]

I would stick at 0 degrees if I were you. Advancing is more for higher rpm range power and large lift cams with ported heads, IMO you will loose the lower rpm power that you really need in a 4x4, and with the rv cam it seems pointless.