On a standard Chevy/Jeep Saginaw power steering pump and box.
What size are the O ring fittings, for the high pressure and return lines, at both ends? I need to order adapters to AN fittings, but I dont know the Saginaw info, and I dont have any tech manuals here at work.

http://www.partsamerica.com/PartDetails.asp?SourceArea=&SourcePage=SEARCHRESULTS&CategoryCode=&QueryID=1994479&QueryCounter=2&BeginRecord=1&EndRecord=25&PreviousPage=PartTypes&LastRecord=25&TopLevelCategoryCode=&TopLevelCatDesc=&PartType=18&UnitPrice=29%2E99&MfrCode=PWR&MfrPartNumber=91630++++++++++&ProductDescription=91630%2FEP1630+PWR+ST+HOSE+++++ ++++++&ShipmentRestriction=2++&Quantity=1&Weight=2&HandlingCost=0&CoreCharge=0&StoreCount=0&DcCount=1&HomeDelCount=0&SoItemFlag=1&ShipRestrictionCode=2++&SearchFor=Power+Steering+Pressure+Hose&AppliedDiscount=0&SpecialType=

i did a search on Advance Autos' website and found this. looks like its 16mm O-ring on one end and 18mm o-ring on the other. here are the Aeroquip P/N's :

http://www.stockcarproducts.com/index.htm

go down to and click on "Hose and Fittings" on the left and the select "Power Steering Fittings" in the center

matt

well if you clean out you mail box
I can send you the Info

or call me I am working Night's

start at 10 pm

916-203-2326

Adam,