bigjeepguy
05-04-2005, 11:01 PM
I am in the process of selling parts of a project of mine that I had to give up on, but e-mailed someone a list of all the parts, and thought I should post them on here in case someone wanted the complete project.
Anyway, I have the two front rockwell axles, 4 rockwell wheels/ junk tires, Buick 455 engine and th400 2wd transmission, divorced np205 tcase, and 6 44" tires (2 brand new ground hawgs, 2 gumbo mudders w/~70% tread, and 2 Gumbo mudders w/~40% tread). Also have a 1964 full size jeep body in excellent condition (currently on a full float dana 60 rear and closed knuckle dana 44 front). I also have an aluminum radiator roughly the dimensions of that of a Full size jeep; although the catch with that is that it is out of a heat exchanger, so the inlet/outlet has to be welded on, and the current in/out welded shut. Basically I have everything to complete the project except suspension (unless you wanted to use leaf springs) and hydraulics (for the time being I was going to run the "rear" front end locked in place, just like a rear axle.
I would like to get $2800 OBO for everything, which, if you add up the list of everything, is a screaming deal. I can also include 4 brand new chevy rotors for machining your own wheel brakes.
-Andy
(360) 909 3055
Anyway, I have the two front rockwell axles, 4 rockwell wheels/ junk tires, Buick 455 engine and th400 2wd transmission, divorced np205 tcase, and 6 44" tires (2 brand new ground hawgs, 2 gumbo mudders w/~70% tread, and 2 Gumbo mudders w/~40% tread). Also have a 1964 full size jeep body in excellent condition (currently on a full float dana 60 rear and closed knuckle dana 44 front). I also have an aluminum radiator roughly the dimensions of that of a Full size jeep; although the catch with that is that it is out of a heat exchanger, so the inlet/outlet has to be welded on, and the current in/out welded shut. Basically I have everything to complete the project except suspension (unless you wanted to use leaf springs) and hydraulics (for the time being I was going to run the "rear" front end locked in place, just like a rear axle.
I would like to get $2800 OBO for everything, which, if you add up the list of everything, is a screaming deal. I can also include 4 brand new chevy rotors for machining your own wheel brakes.
-Andy
(360) 909 3055