PDA

: warn and ctm pics

garbageman
02-26-2002, 10:57 AM
ctm send them out on thursday got them saturday very fast service. tight fit not hard to put in but they are beeffy
garbageman
02-26-2002, 11:00 AM
warn
borton
02-26-2002, 11:19 AM
:drool:
Rubicrawler
02-26-2002, 11:22 AM
Those babies are beautifull! Are those zerks on the caps?
borton
02-26-2002, 11:25 AM
Originally posted by Rubicrawler
Those babies are beautifull! Are those zerks on the caps? yup, the needle type.
SMART ASS
02-26-2002, 01:52 PM
:eek: :eek: :eek:
H8monday
02-26-2002, 04:32 PM
Very Sexy!:D
3/4tonYJ
02-26-2002, 05:55 PM
sweet,
them are on my dreaming about list............i don't break spicer stuff enough myself......
yjtj
02-26-2002, 06:11 PM
they look okay, but i think ill keep my d60 :)
RockRover
02-26-2002, 08:28 PM
Cool...But what's up with the orbital valve? Ross?

--D
RocnWilly
02-26-2002, 10:26 PM
what was the cost of the CTM joints?
Keith
02-26-2002, 10:43 PM
IMHO, waste of money. Sell your 44, take the money from the "beefy" axles, and put in a 60.
rockbound
02-27-2002, 07:46 AM
Originally posted by Keith
IMHO, waste of money. Sell your 44, take the money from the "beefy" axles, and put in a 60.

Then if you want to realy beef it buy the ctm's for the 60 and the warn shafts!!

:eek: :eek: :eek:
clc900
02-27-2002, 09:10 AM
Originally posted by rockbound


Then if you want to realy beef it buy the ctm's for the 60 and the warn shafts!!

:eek: :eek: :eek:

I didnt know Warn made shafts for the D60. :rolleyes:
Aggro
02-27-2002, 11:32 AM
last I checked.... they didn't.
IronBenderII
02-27-2002, 11:40 AM
Sweet!!!!

I just ordered my warns/CTM's and they'll be here this weekend!! Me and a couple of other guys are going to go test them @ Hollister in March. He's got the superior shafts and 39" Boggers on his Bronco and I'm running the 38.5" SX's on mine. We'll see how they hold up!

-Jack
RoCkSkuLLz
02-27-2002, 11:55 AM
:D hey those look familiar... hehehe.. I have the exact same combo sitting in my room ready to be installed in my waggy front axle. Im installing them on Sunday. :D
garbageman
03-03-2002, 09:26 AM
yeah yeah a 60 would be sweet but im to close to start changing all that out again orbital valve is for my steering full hydrolic?
:flipoff2:
TJ99
04-13-2002, 05:07 PM
Has anyone ran these CTM joints on a street rig? If so how often do you grease them? Mines not a daily driver but in the summer it see a fair amount on street duty.
GearMan
04-13-2002, 05:20 PM
just bought the wife another set of the warns and ctms for her rig hehehe :D and since i got her those i ordered my 60 ctms also should be here on monday :flipoff2:
anthony_harris
04-13-2002, 05:33 PM
Originally posted by TJ99
Has anyone ran these CTM joints on a street rig? If so how often do you grease them? Mines not a daily driver but in the summer it see a fair amount on street duty.

Shouldn't matter unless you drive around with your hubs locked in.:flipoff2:
KILLERXJ
04-13-2002, 10:57 PM
very sweet combo!!!
44Runner
04-14-2002, 12:58 AM
Originally posted by anthony_harris


Shouldn't matter unless you drive around with your hubs locked in.:flipoff2:

You still have to take into account turning... :flipoff2:
CJ-Jeeper
04-16-2002, 06:50 PM
Originally posted by 44Runner


You still have to take into account turning... :flipoff2:

I'd say he has a TJ -no hubs.

Just ordered mt Warns & CTM's yesterday. The shafts should be shipped Friday & about 1 1/2 weeks for the CTM's.