BlueTorch
05-13-2005, 03:25 PM
http://www.bluetorchfab.com/oscomm/catalog/product_info.php?products_id=356
http://www.bluetorchfab.com/oscomm/catalog/images/lrgLinksystem.jpg
This link mounting system is used to mount lower links with large rod ends. It is designed to fit on 1.75" od tube. The links from the axle tubes angle in and meet under the t-case at this mount. The hole size is 3/4" so with a 1 inch bore rod end you must use a high misalignment spacer to reduce the bolt size to 3/4".
If you have any questions please let me know.
Thanks
Dan
http://www.bluetorchfab.com/oscomm/catalog/images/lrgLinksystem.jpg
This link mounting system is used to mount lower links with large rod ends. It is designed to fit on 1.75" od tube. The links from the axle tubes angle in and meet under the t-case at this mount. The hole size is 3/4" so with a 1 inch bore rod end you must use a high misalignment spacer to reduce the bolt size to 3/4".
If you have any questions please let me know.
Thanks
Dan