Maine Jeepah
02-26-2002, 05:18 PM
;DThe Scout Sawzall Superfest commences!! ;D
Figured you west/southwest guys might get a kick out of the crap we have to deal with out here. :flipoff2:
Took 2/ 50 gallon cans to empty out all the debris/broken glass etc...form the bed. uggg. :D
Running gear should be fine, motor runs ;) shoudl be a real beast.
----------------------------
The subject:
http://mainejeepah.homestead.com/files/scouttopless.jpg
_____________________
Driver side with "carpet" ripped out.
http://mainejeepah.homestead.com/files/scoutdriverside.jpg
_____________________
One of the many reasons she is being bobbed/flatbedded/custom rocker, floorpan area.
http://mainejeepah.homestead.com/files/scoutbondo.jpg
________________________
More insanity!
http://mainejeepah.homestead.com/files/scoutdriverrocker.jpg
http://mainejeepah.homestead.com/files/scoutdriverrocker1.jpg
________________________
This is why the bed is going bye bye:
http://mainejeepah.homestead.com/files/scoutbedwall.jpg
http://mainejeepah.homestead.com/files/scoutbedwall1.jpg
_________________________
Look MOM no seat!!
http://mainejeepah.homestead.com/files/scoutnoseatpassside.jpg
_________________________
The plan right now is to remove everything, from the rear of the door sill back.
I plan on replacing the rockers, and front floorpans.
I think I will be able to make square tube rockers, higher up than stock, and cut 4 or 5 inches off of the bottom of the doors.
I want to keep the doors, in order to keep it streetable.
The floor/rocker will end up kinda like a jeep tub. ;)
SOA, welded Front and rear diffs sawzall the front wheel wells,repair the w/s frame, put in the windsheild, a few things like lights and such and it'll be a trail pig!!
Plan is for it to look sorta like this. :rasta:
http://mainejeepah.homestead.com/files/ScoutBobSwampChopped.jpg
MJ
Figured you west/southwest guys might get a kick out of the crap we have to deal with out here. :flipoff2:
Took 2/ 50 gallon cans to empty out all the debris/broken glass etc...form the bed. uggg. :D
Running gear should be fine, motor runs ;) shoudl be a real beast.
----------------------------
The subject:
http://mainejeepah.homestead.com/files/scouttopless.jpg
_____________________
Driver side with "carpet" ripped out.
http://mainejeepah.homestead.com/files/scoutdriverside.jpg
_____________________
One of the many reasons she is being bobbed/flatbedded/custom rocker, floorpan area.
http://mainejeepah.homestead.com/files/scoutbondo.jpg
________________________
More insanity!
http://mainejeepah.homestead.com/files/scoutdriverrocker.jpg
http://mainejeepah.homestead.com/files/scoutdriverrocker1.jpg
________________________
This is why the bed is going bye bye:
http://mainejeepah.homestead.com/files/scoutbedwall.jpg
http://mainejeepah.homestead.com/files/scoutbedwall1.jpg
_________________________
Look MOM no seat!!
http://mainejeepah.homestead.com/files/scoutnoseatpassside.jpg
_________________________
The plan right now is to remove everything, from the rear of the door sill back.
I plan on replacing the rockers, and front floorpans.
I think I will be able to make square tube rockers, higher up than stock, and cut 4 or 5 inches off of the bottom of the doors.
I want to keep the doors, in order to keep it streetable.
The floor/rocker will end up kinda like a jeep tub. ;)
SOA, welded Front and rear diffs sawzall the front wheel wells,repair the w/s frame, put in the windsheild, a few things like lights and such and it'll be a trail pig!!
Plan is for it to look sorta like this. :rasta:
http://mainejeepah.homestead.com/files/ScoutBobSwampChopped.jpg
MJ