PDA

View Full Version : Jimmy Joint V.2.......

TJ Fan
05-16-2005, 12:15 PM
Most of you guys have seen these before. They have been improved from V.1 and are even better. The biggest difference is the outer wall thickness on the body. The new one is almost 3x thicker here to prevent failures. The new balls are made from 17-4 PH stainless.
Completely rebuildable, yada, yada :D
These joints are just badass...

Mad4wd will replace any joint that fails. We are not covering any cosmetic damage. You send us the old one and we send you a new one..no BS

These have a 5/8" bore with a 7/8" shank. We also have the threaded inserts and jam nut for them if needed. These are in stock :grinpimp:

Please call us @ 330-549-9082

thanks,
Larry
TJ Fan
05-16-2005, 12:18 PM
#2
TJ Fan
05-16-2005, 12:19 PM
#3
gtkustoms
05-16-2005, 03:20 PM
8 w/inserts/locks
shipped 87031
XTRMTOY
05-16-2005, 04:52 PM
4 RH thread with lock nuts
Canada, Ontario, L0G 1M0
BrettM
05-16-2005, 08:18 PM
CALL them

I've always received great customer service from these guys on the phone, but they don't do the PM quote thing like some of the other vendors here.
samnelso
05-16-2005, 09:05 PM
How wide are these at the 5/8 hole. i.e how far appart do the mounting tabs need to be? Thanks, Sam
TJ Fan
05-17-2005, 08:20 AM
How wide are these at the 5/8 hole. i.e how far appart do the mounting tabs need to be? Thanks, Sam


Sam,
They are 2.00" wide where the tabs would be and they have a 2.5" diameter body.


thanks,
Larry

As Brett said, just call us if you are interested. Thanks
DaDunc205x
05-17-2005, 05:37 PM
how strong are these? similar to a 3/4" jmx or more?
BrettM
05-17-2005, 09:20 PM
must be pretty damn strong if they're gonna replace any joint that fails, with no tire size/hp/gearing/weight limitations.

Rockwells, 49s, Big-block..... hmmmm ;)
TJ Fan
05-18-2005, 03:09 PM
As far as the strength issue goes.....bring it :D

thanks,
Larry
mj
05-18-2005, 09:06 PM
to me that translates to the 5/8" bolt is gonna go before the joint pops
geberhard
05-19-2005, 09:08 AM
nice :) BTT
jeepn4life
06-12-2005, 08:59 PM
how thick are they, ie how far appart do the brackets need to be for these to fit>

Any chance they come in a longer shank? I am worried that they are too short and not being able to adjust them much...
MRJ
06-13-2005, 07:40 AM
how thick are they, ie how far appart do the brackets need to be for these to fit>

Any chance they come in a longer shank? I am worried that they are too short and not being able to adjust them much...

The shank is just a bit over 2 inches long. This is a bit longer than the 7/8" standard heim joint. This should offer plenty of adjustability.
LUVMYTJ
06-17-2005, 06:58 AM
8 shipped to 71082