|
forgivn707 02-26-2002, 07:46 PM I bought a set of axles Dana 44 with an ARB and a 14 bolt witha detoit locker, 3/4 ton 8 lug, full width. can it be installed in a CJ7, I been told no way, and I been told anything can be done, Anyhelp will be appreciated, Thanks Brian1 02-26-2002, 07:49 PM Yes it can be done - lots of people have. I did/am doing it in my 1942 flat fender. James K 02-26-2002, 09:26 PM Yes it can. You will have to out board the front spring mounts. Do a search on out board spring mounts. And welcome. Shaggygto 02-26-2002, 09:47 PM it can be done. I have the same setup in my CJ-7 right now. you will have to outboard the springs as mentioned before. it is a nice setup if you want the full width axles, but you might consider getting a front 60 to go along with that beefy rear axle in the future. | |