14 bolt pinion guard $65 shipped to your door [Archive]

Greatlakeoffroad

05-22-2005, 12:20 PM

Here is our newly designed 14 bolt pinion guard it will fit over both the 1350 & 1410 yokes. If your interested send me an e-mail at the below addy. Thanks Shawn

http://i8.ebayimg.com/01/i/03/b8/fc/4e_1_b.JPG

GREENEJEEP

05-22-2005, 12:49 PM

How about your diff covers? I would like to see the d-60 and 14bolt covers, I seen your article in a 4-wheel mag.

Judd

05-23-2005, 12:41 PM

I have one of these pinion guards and cover, they are truly badass. Props to Shawn, great parts and killer deals! :)

Greatlakeoffroad

05-23-2005, 07:27 PM

Thanks for the props Judd I know you have been a fan for quite some time. Hey what are you doing weekend after memorial day? You should swing on down and make the run to Harlan KY with us, from what I've read and talked with the locals down there its going to be killer. And it seems as alot of folks are going down. Thanks again, Shawn

I have one of these pinion guards and cover, they are truly badass. Props to Shawn, great parts and killer deals! :)

Judd

05-24-2005, 06:59 AM

Man, wish I could make it but the heep is still under construction and needs: front end buttoned up, driveshafts, wheels and tires, mount and twinstick the D300, yaddayaddayadda... Keep me in mind later this summer if you make another run... Thanks, Judd

k5blazerkeith

05-24-2005, 04:16 PM

Shawn, do you have any other pics of this pinion guard? I am just trying to figure out how far it extends from the yoke? How much driveshaft/u-joint coverage does it give (if any)?? This is the exact design I wanted to do, but my skills are nowhere near yours obviously! :smokin: Hopefully it gives some much needed protection/coverage to the u-joint area...if so, I willbe getting this AND the diff cover...thanks

Greatlakeoffroad

05-24-2005, 08:17 PM

Sorry to hear that but I know what you mean as my heaps heart is still at the engine shop so we're only taking our atv's down to tool around on this go around as we try not to have to wrench on those they seem to always be running. If we go later I will definitely drop you a line. Shawn

Man, wish I could make it but the heep is still under construction and needs: front end buttoned up, driveshafts, wheels and tires, mount and twinstick the D300, yaddayaddayadda... Keep me in mind later this summer if you make another run... Thanks, Judd :smokin:

Greatlakeoffroad

05-24-2005, 08:19 PM

5.25" from face of pinion bolt flange out and it does offer a bit of protection to the u-joint area. Thanks Shawn

Shawn, do you have any other pics of this pinion guard? I am just trying to figure out how far it extends from the yoke? How much driveshaft/u-joint coverage does it give (if any)?? This is the exact design I wanted to do, but my skills are nowhere near yours obviously! :smokin: Hopefully it gives some much needed protection/coverage to the u-joint area...if so, I willbe getting this AND the diff cover...thanks

jekbrown

05-26-2005, 11:18 PM

me likes! one more thing to add to the list. You still need to start making toy disc brake brackets though. ;) did that trade you had with the guy that had some ever go through? ok, sorry for the hijack... bump for ya. :)

j

Greatlakeoffroad

05-27-2005, 06:16 AM

Picking up a Toy axle next weekend from Ronnie Shoope at the new Harlan, KY offroad park opening. Were swapping parts for parts so it works out good. Thanks Shawn

me likes! one more thing to add to the list. You still need to start making toy disc brake brackets though. ;) did that trade you had with the guy that had some ever go through? ok, sorry for the hijack... bump for ya. :)

j

GREEN XJ

06-06-2005, 10:40 PM

Sent emails and no response, I'd like to order one from ya.

Greatlakeoffroad

06-06-2005, 11:00 PM

Sent emails and no response, I'd like to order one from ya.

You have an e-mail, Thanks Shawn

Greatlakeoffroad

06-21-2005, 10:02 PM

bump

GREEN XJ

06-22-2005, 06:48 PM

Never got an email try again still want one.

Greatlakeoffroad

06-23-2005, 09:44 PM

I tried again. Thanks Shawn

Never got an email try again still want one.

k5blazerkeith

06-27-2005, 02:36 PM

Greatlakeoffroad

06-27-2005, 06:10 PM

Shawn,

Just wanted to say the pinion guard works awesome! I bolted it on last week, took out the truck last weekend...scored a direct hit on the pinion guard! It just scratched off the paint I put on it...I think you may have a few more buyers after my buddies saw it in action...without the guard, it definitely would have messed up my driveshaft and u-joints!

Thanks for a great product at good prices! I also put the Dominator diff cover on last week, have yet to back up into any rocks with it yet! :smokin:

Please take it easy on the rocks we wouldn't want Green Peace or anyone else getting their tails riffled. And the rest of us on here would like some rocks left to play with when your done so keep the rock carnage to a minimum :smokin: Thanks for the props, Shawn

GREEN XJ

06-27-2005, 11:35 PM

Did you receive my order and money?

Greatlakeoffroad

06-28-2005, 10:32 AM

If you e-mail me your shipping name and addy I will pull your tracking info for you. Thanks Shawn

Did you receive my order and money?

bigcamojeep

06-28-2005, 12:38 PM

I think I can talk the wifey into this one, after I show her the grinding that's on the pinion now. This thread is going into the favorites/products to buy folder :)

bigcamojeep

06-28-2005, 12:40 PM

I think I can talk the wifey into this one, after I show her the grinding that's on the pinion now. Shawn, where you guys located? Are ya anywhere near Valparaiso, IN?

Greatlakeoffroad

06-28-2005, 09:57 PM

2 mins from OH and 25 from MI we've been moving alot of these lately. Thanks Shawn

I think I can talk the wifey into this one, after I show her the grinding that's on the pinion now. Shawn, where you guys located? Are ya anywhere near Valparaiso, IN?

2LoudDodge

07-03-2005, 11:26 PM

Will this fit along with the truss from Bluetorch? if so, price shipped to 80022.
Thanks

Greatlakeoffroad

07-04-2005, 03:28 AM

I believe 80022 is in CO correct? If so this falls under the $65 to your door title of this post. As far as fitting with BTF;s products I have no idea as I do not buy his parts. Thanks Shawn

Will this fit along with the truss from Bluetorch? if so, price shipped to 80022.
Thanks

camo-kazi

07-14-2005, 11:00 PM

saw your e-bay blurp. think i'll be getting one herre contact you next week waiting for deal to go on 78 cougar. cut a deal if iget a cover to?????time for more protection :smokin: :beer: :skull:

Greatlakeoffroad

07-15-2005, 02:55 PM

We'll treat you right, Let me know when your ready. Thanks Shawn

saw your e-bay blurp. think i'll be getting one herre contact you next week waiting for deal to go on 78 cougar. cut a deal if iget a cover to?????time for more protection :smokin: :beer: :skull:

Greatlakeoffroad

07-16-2005, 08:59 PM

We also now accept credit cards for payment however to keep prices low for everyone there will be a $10 minimum or 10% (whichever is more) convenience fee added to the total purchase amount. Thanks Shawn

jriggs

07-17-2005, 11:15 AM

shawn,

did you get the e-mail i sent on thuesday???? i want one of the 14 pinion gaurds.....can i just call your work number during working hours and pay via credit card now????

thanks, riggs

Greatlakeoffroad

07-17-2005, 01:10 PM

Yes we replied to that e-mail? Did you not get it? Anyhow here's the basic jist of how the CC payment has to work until I get my online store fully up and functional. It may always work like this for PBB members anyhow due to the reduced rates I sell to you guys at. If you want to pay via CC I have to send you an e-mail with a link that directs you to our CC payment companies site. You will fill out all the blanks w/ CC #'s and such and pay through their secured server. At that time they send me an invoice stating you paid and we ship. Pretty simple I will just need a working e-maill addy. Thanks Shawn

shawn,

did you get the e-mail i sent on thuesday???? i want one of the 14 pinion gaurds.....can i just call your work number during working hours and pay via credit card now????

thanks, riggs

jriggs

07-17-2005, 07:56 PM

awesome...i'll e-mail again in the morning so you can send me the link. what cards do you take....Visa, AMEX, Discovery????

i'll get it done 2morow morning once i get into my office!

thanks shawn, can't wait to get the pinion guard!!!!

later, riggs

Greatlakeoffroad

07-17-2005, 08:12 PM

You are correct you can even do an e-check via this route if you want. Thanks Shawn

awesome...i'll e-mail again in the morning so you can send me the link. what cards do you take....Visa, AMEX, Discovery????

i'll get it done 2morow morning once i get into my office!

thanks shawn, can't wait to get the pinion guard!!!!

later, riggs

bigcamojeep

07-17-2005, 09:14 PM

You are correct you can even do an e-check via this route if you want. Thanks Shawn

Is paypal an option?

Greatlakeoffroad

07-19-2005, 01:15 PM

If you are a verified member you can use a debit card we do not accept CC through them as always due to their policies not protecting me. You can also do an account transfer if you have the $$$ in your account. Thanks Shawn

Is paypal an option?

geberhard

07-19-2005, 01:34 PM

so Shawn,

can I send you a paypal payment? Not clear from the above? I am a paypal verified member. Which address can I send it to?

Thanks,

Gui

jriggs

07-19-2005, 03:56 PM

shawn,

i did that on-line card payment today. it worked great! i'm not sure if it's on there or not...but i'll PM you my shipping address. i used my PO box on the internet and you can't ship UPS to a PO Box.

RADDONKEY

07-19-2005, 05:09 PM

I'll take one, send me a p/m with the address and I'll send a MO tommorrow. Its $65 shipped to 89706? Thanx RD :D

jriggs

07-19-2005, 06:06 PM

hey shawn,

quick question......they charged me $75 today over the internet and i thought the delivered price for PBB members was $65?? was it more for some reason i missed or was that a mistake.

thanks, riggs

Greatlakeoffroad

07-21-2005, 08:37 AM

We have a minimum $10 convenience charge for anything under $100 over a $100 its 10% of the total cost for paying by CC, We sell them for $65 if you want to buy it by snail mail or Paypal account transfers are always an option also. So basically we keep costs low for everyone and only charge the extra to those who need the rush delivery or prefer to pay via CC to keep things simple. Thanks Shawn

hey shawn,

quick question......they charged me $75 today over the internet and i thought the delivered price for PBB members was $65?? was it more for some reason i missed or was that a mistake.

thanks, riggs

Greatlakeoffroad

07-21-2005, 08:38 AM

If your a verified member yes you can use a debit card. Thanks Shawn

so Shawn,

can I send you a paypal payment? Not clear from the above? I am a paypal verified member. Which address can I send it to?

Thanks,

Gui

Greatlakeoffroad

07-21-2005, 08:39 AM

Shipped, Thanks Shawn

shawn,

i did that on-line card payment today. it worked great! i'm not sure if it's on there or not...but i'll PM you my shipping address. i used my PO box on the internet and you can't ship UPS to a PO Box.

Greatlakeoffroad

07-21-2005, 08:41 AM

We only use e-mail to keep everything simple. Thanks Shawn

I'll take one, send me a p/m with the address and I'll send a MO tommorrow. Its $65 shipped to 89706? Thanx RD :D

geberhard

07-21-2005, 10:02 AM

Shawn, please confirm on the paypal address to send teh payment to. To confirm, I can send $65 via paypal, correct?

Is teh paypal address "Shawn4x4@greatlakeoffroad.com"

thanks,

GUi

Greatlakeoffroad

07-21-2005, 02:54 PM

That is correct. Thanks Shawn

Shawn, please confirm on the paypal address to send teh payment to. To confirm, I can send $65 via paypal, correct?

Is teh paypal address "Shawn4x4@greatlakeoffroad.com"

thanks,

GUi

geberhard

07-21-2005, 03:21 PM

Shawn,

Thanks, and paypal just sent. Great buying from ya again, :beer:

Gui

Greatlakeoffroad

07-22-2005, 11:19 AM

As seen in the latest issue of JP mag :)

Bushwhacker

07-24-2005, 10:05 PM

Just sent paypal for one of these. Look forward to testing it. :D

Greatlakeoffroad

07-25-2005, 08:08 PM

Got it shipping ASAP let me know how the testing goes? Thanks Shawn

Just sent paypal for one of these. Look forward to testing it. :D

87JeepWrangler

07-27-2005, 11:04 PM

do i need to remove my 1410 yoke to fit this over?

Greatlakeoffroad

07-28-2005, 09:11 PM

original post

Here is our newly designed 14 bolt pinion guard it will fit over both the 1350 & 1410 yokes. If your interested send me an e-mail at the below addy. Thanks Shawn

http://i8.ebayimg.com/01/i/03/b8/fc/4e_1_b.JPG

camo-kazi

08-06-2005, 10:27 PM

shawn finally got one ordered last weekend how do you ship so I know who to look for? :smokin: :beer: :skull:

Greatlakeoffroad

08-07-2005, 09:00 AM

UPS ground what was your shipping name and maybe I can pull the tracking info for you. :D

shawn finally got one ordered last weekend how do you ship so I know who to look for? :smokin: :beer: :skull:

camo-kazi

08-08-2005, 12:26 AM

Rich Moulton

87JeepWrangler

08-08-2005, 07:13 AM

i'll take a tracking # on mine too if you dont mind. hope to have it soon so i can use my new toys this weekend. thanks.

rob wehrs

Kaiser5

08-08-2005, 09:56 AM

original post
Sent you an e-mail.
Mike

geberhard

08-09-2005, 05:39 PM

Shawn,

I am getting around the rig again this week (locked on honey do duties, so hopefully getting things up again soon :) The dif cover and pinion guard are sweet! There is only one word to describe the set, and it is BEEF! Will do a quick write-up with pics and test bashing out on the rocks soon :)

Defintely recommend Shawn, great wuality and fast shipping. I am already running Shawn longer leaf perches, got the 14 bolt cover and dif protection, all that is left is the dic brake conversion kit, so am starting toi save $$ :D

click on thumbnail for bigger pics :D
http://img364.imageshack.us/img364/5469/difandpinion4vk.th.jpg (http://img364.imageshack.us/my.php?image=difandpinion4vk.jpg)

and

http://img364.imageshack.us/img364/6563/difandpinion27qt.th.jpg (http://img364.imageshack.us/my.php?image=difandpinion27qt.jpg)

Greatlakeoffroad

08-09-2005, 08:32 PM

i'll take a tracking # on mine too if you dont mind. hope to have it soon so i can use my new toys this weekend. thanks.

rob wehrs

1Z1F13T20398381600 Thanks Shawn

Greatlakeoffroad

08-09-2005, 08:35 PM

Thanks for the props Gui, Shawn

Shawn,

I am getting around the rig again this week (locked on honey do duties, so hopefully getting things up again soon :) The dif cover and pinion guard are sweet! There is only one word to describe the set, and it is BEEF! Will do a quick write-up with pics and test bashing out on the rocks soon :)

Defintely recommend Shawn, great wuality and fast shipping. I am already running Shawn longer leaf perches, got the 14 bolt cover and dif protection, all that is left is the dic brake conversion kit, so am starting toi save $$ :D

click on thumbnail for bigger pics :D
http://img364.imageshack.us/img364/5469/difandpinion4vk.th.jpg (http://img364.imageshack.us/my.php?image=difandpinion4vk.jpg)

and

http://img364.imageshack.us/img364/6563/difandpinion27qt.th.jpg (http://img364.imageshack.us/my.php?image=difandpinion27qt.jpg)

Greatlakeoffroad

08-09-2005, 08:39 PM

Rich, you have an e-mail. Thanks Shawn

Rich Moulton

camo-kazi

08-11-2005, 05:30 PM

Got it already. Got it on, cant wait to try it out. Great shipping time. Thanks.

21TToy

08-11-2005, 07:57 PM

Another thanks to Shawn- got my pinion guard today and b-lock rings today. Great product; great price; great service...... you can't ask for more than that !!!

Greatlakeoffroad

08-11-2005, 08:00 PM

Thanks for the props guys, we've really been working hard trying to have the best customer service around with 90% of our product always on the shelf. Thanks Shawn

geberhard

08-17-2005, 11:11 AM

Shawn,

Installed pinion guard last night, came out pretty sweet and bling. I have the rear HD cover ready to go, but decided to wait the install until I shave the 14 bolt and do it at the same time, moving shocks around, etc. Easy install, and came out sweet! Testing it thsi weekend in Deer Valley, Poker run :)

Gui

Greatlakeoffroad

08-17-2005, 06:32 PM

Thanks for the props we have been getting alot of good response to these. Shawn

Shawn,

Installed pinion guard last night, came out pretty sweet and bling. I have the rear HD cover ready to go, but decided to wait the install until I shave the 14 bolt and do it at the same time, moving shocks around, etc. Easy install, and came out sweet! Testing it thsi weekend in Deer Valley, Poker run :)

Gui

http://www.pirate4x4.com/forum/attachment.php?attachmentid=201688

Greatlakeoffroad

09-10-2005, 02:29 PM

bump

Bushwhacker

09-12-2005, 04:16 PM

This guard kicks ass. It took the abuse this weekend at the RROCK comp instead of my ujoint straps. :smokin:

Greatlakeoffroad

09-12-2005, 07:01 PM

Thankyou, would love to see pics. Shawn

This guard kicks ass. It took the abuse this weekend at the RROCK comp instead of my ujoint straps. :smokin:

Greatlakeoffroad

09-12-2005, 07:02 PM

D-60 Pinion guard is almost ready! :eek:

SlamChops

09-12-2005, 07:37 PM

hey shawn, check your Twin-Stick thread please. :)

Bushwhacker

09-14-2005, 08:14 AM

Thankyou, would love to see pics. Shawn

http://midwestjeepthing.com/jeep/member/images/Bushwhacker/CarnageExitSM.jpg
http://midwestjeepthing.com/jeep/member/images/Bushwhacker/CarnageRearSM.jpg
http://midwestjeepthing.com/jeep/member/images/Bushwhacker/Carnage%20damageSm.jpg

Here is your front diff cover taking some abuse... :D
http://midwestjeepthing.com/jeep/member/images/Bushwhacker/UncleJohnsSM.jpg
http://midwestjeepthing.com/jeep/member/images/Bushwhacker/UncleJohnsBigRockSM.jpg

Greatlakeoffroad

10-08-2005, 08:29 AM

Sweet pics, Thanks Shawn

Toonces75

10-10-2005, 08:34 AM

Could I get a price on a Diff cover for a 14 Bolt and a yoke guard shipped to 72936? Thanks

Greatlakeoffroad

10-10-2005, 10:31 AM

Sent you an e-mail, Let me know. Thanks Shawn

Could I get a price on a Diff cover for a 14 Bolt and a yoke guard shipped to 72936? Thanks

Toonces75

10-10-2005, 01:44 PM

Shawn, hey that email never showed up. Toonces75@Pirate4x4.com thanks

Never mind my mistake, I got it. That is a good price. I will get back to you soon thanks again.

Greatlakeoffroad

10-10-2005, 06:21 PM

I just read your whole quote. Sorry sent another e-mail. Thanks Shawn

Shawn, hey that email never showed up. Toonces75@Pirate4x4.com thanks

Never mind my mistake, I got it. That is a good price. I will get back to you soon thanks again.

AprilzWarrior

10-10-2005, 09:23 PM

Hmmm I like.

I think Ill order one soon

Greatlakeoffroad

10-10-2005, 09:32 PM

Let me know, price is not going down with steel and full going up. Thanks Shawn

Hmmm I like.

I think Ill order one soon

locked

10-16-2005, 05:28 PM

PM Sent, the BS this will save me!!

Greatlakeoffroad

10-26-2005, 05:50 AM

bump

Greatlakeoffroad

11-28-2005, 04:54 PM

Great stocking stuffers for your 14 bolt fan

Toonces75

12-26-2005, 12:37 PM

Hey man is the offer still good??????????? Cause I need one for my 14 bolt

Greatlakeoffroad

01-01-2006, 07:51 PM

As always still good, Thanks Shawn

Hey man is the offer still good??????????? Cause I need one for my 14 bolt

Toonces75

01-02-2006, 11:00 AM

Cool, then tell me how you want the money, PayPal etc.....and get that booger on the way.......My 14bolt will be crying for it before long......:D

Greatlakeoffroad

01-02-2006, 07:37 PM

Paypal non CC payments to the e-mail addy listed on all my posts or send a check, cashiers check or money order to the addy below. Thanks Shawn

GLO
3433 SR1
Butler, IN. 46721

Cool, then tell me how you want the money, PayPal etc.....and get that booger on the way.......My 14bolt will be crying for it before long......:D

Toonces75

01-05-2006, 05:26 PM

Hey dude, I just sent the money for the 14 Bolt Pinion Guard.....thanks man.....:D

Greatlakeoffroad

01-06-2006, 07:49 PM

Sounds good we'll get it right out. Thanks Shawn

Hey dude, I just sent the money for the 14 Bolt Pinion Guard.....thanks man.....:D

camo-kazi

01-11-2006, 11:43 PM

Shawn the pinion gaurd works great on rocks and stumps,love it. Could you quote me a price on a 14 bolt diff cover to P8n 1R1
Thanks Rich:smokin: :beer: :skull:

Trailtoyz

01-13-2006, 06:33 PM

are you around? Call my cell

ERik
907.350.9573

camo-kazi

01-13-2006, 10:24 PM

are you around? Call my cell

ERik
907.350.9573
I'm very happy dealling with shawn.If I wasn't I wouldn't be back , so stop trying to scam other guys bussiness:flipoff2: :flipoff2: :flipoff2: :flipoff2: :flipoff2: :flipoff2: :flipoff2: :flipoff2: :flipoff2:

Trailtoyz

01-13-2006, 10:33 PM

Are you smokin crack?:smokin: I need him to call me because a customer needs one of his parts ASAP.

Greatlakeoffroad

01-14-2006, 08:18 AM

Thanks for the props I'm glad everything has worked out well. Shawn

I'm very happy dealling with shawn.If I wasn't I wouldn't be back , so stop trying to scam other guys bussiness:flipoff2: :flipoff2: :flipoff2: :flipoff2: :flipoff2: :flipoff2: :flipoff2: :flipoff2: :flipoff2:

Greatlakeoffroad

01-14-2006, 08:19 AM

Erik, you have an e-mail and a voice mail let me know, Thanks Shawn

Are you smokin crack?:smokin: I need him to call me because a customer needs one of his parts ASAP.

Trailtoyz

01-14-2006, 09:45 AM

Thanks Shawn, your shops top of the line

camo-kazi

01-14-2006, 04:29 PM

sorry about that misunderstood,:confused: :confused:

Greatlakeoffroad

01-14-2006, 05:01 PM

Nah no problem, Erik was just blowing you some shit he's a good guy also. Thanks Shawn

sorry about that misunderstood,:confused: :confused:

Greatlakeoffroad

01-29-2006, 03:38 AM

Ttt

Greatlakeoffroad

02-16-2006, 05:06 PM

bump

Sandspyder44

03-15-2006, 07:40 PM

Email sent.

Black97TJ30022

03-16-2006, 09:20 AM

pm sent

toolman4x460ci

03-28-2006, 05:24 AM

I have tried reaching you sense last Friday, saw your stuff on E-bay. Great prices on the things I need. I need a 60 diff cover with rec bolt holes and 14 bolt cover with rec holes and a pinion guard for the 14. Also a brake bracket kit for the 14. If all items are bought at the same time? Get any break on them? Price to 32503. Thanks

CCOR

03-28-2006, 02:25 PM

need to order a 14 bolt pinion guard
thanks
bobby
706-207-4140

toolman4x460ci

03-29-2006, 07:43 PM

Money sent, sent it over night. You should have before 10am thrus. Thanks

toolman4x460ci

03-31-2006, 01:04 PM

Hey Shawn, sent ya a couple emails and pm's. Have not heard back from you yet. Everything ok on your end?

Greatlakeoffroad

03-31-2006, 02:33 PM

Got it were processing the order I have been out with the flu. Thanks Shawn

toolman4x460ci

04-03-2006, 06:34 AM

Hey Shawn, just checking in. Do you no when everything will go out? Tried pming you in private but it says your box is full. Thanks

Sandspyder44

04-10-2006, 10:28 AM

Got mine installed

http://img.photobucket.com/albums/v71/Sandspyder/Jeep/060409105736.jpg

GiS

04-10-2006, 08:58 PM

Shaun, what forms of payment do you accept? Can you ship USPS (United States Postal Service) to Canada?

-Joe

GiS

04-21-2006, 02:03 PM

Dude...I am interested in your product....

April 21st.

camo-kazi

04-23-2006, 02:05 AM

I was a little worried about shovel effect in the mud, had about the same amount hanging off of the rear diff. by the time we got out and dragged one more truck through this crap the gaurd had cleaned itself out.(didn't think of getting a pic at the time) still givin' two thumbs up!!!!:smokin: :beer: :skull:

Sound_Man

06-04-2006, 08:59 PM

price and shipping to buisness 75034

Greatlakeoffroad

06-08-2006, 05:37 PM

$65 to your door. Thanks Shawn

Greatlakeoffroad

11-02-2006, 06:44 PM

TTT Thanks Shawn

Jeepaholik

01-11-2007, 10:36 PM

Have any of these in stock? Looking to get some yoke protection.

GOOBAWIGGA

01-12-2007, 08:37 AM

shawn, i tryed to e-mail but i keeps failing. I want one of your pinion gaurds. please email or pm.
thanks
Eric Brown (ericb@pacpt.com)

Greatlakeoffroad

01-12-2007, 11:51 AM

You both have PM's Thanks Shawn

tlott

01-26-2007, 07:53 AM

If you have any left, I'm interested :)

sknydwn

03-28-2007, 04:17 PM

do you have the 60 pinion guards done yet??
pm me a price on a standard 60 cover, a 14bolt cover and pinion guards for both to 37663
thanks
looking forward to seeing you at Harlan again!

Greatlakeoffroad

04-06-2007, 03:59 PM

Ttt

Jeep itch

04-24-2007, 06:13 AM

Wow another Pirate vendor who fills the order and get it out fast!!!! Customer service is not dead!!!!!

Just arrived last night - very beefy - thanks...

I have not installed it yet - does this just bolt directly on top of the pinion cover?

Saw in the thread that you are making a guard for HP Dana 60? Is this available yet?

Greatlakeoffroad

04-24-2007, 08:30 AM

Thanks for the props it doesn't always happen this fast, however we try. Yes just unbolt six bolts and slip guard over and bolt using our included socket head cap screws. Still working on the D-60 pinion guard. Thanks Shawn

Wow another Pirate vendor who fills the order and get it out fast!!!! Customer service is not dead!!!!!

Just arrived last night - very beefy - thanks...

I have not installed it yet - does this just bolt directly on top of the pinion cover?

Saw in the thread that you are making a guard for HP Dana 60? Is this available yet?

sknydwn

05-03-2007, 08:06 PM

do you think you'll have the 60 pinion guards done by the Harlan run?

Greatlakeoffroad

05-04-2007, 08:36 AM

Doubt I'll have the time to get it finished up as I am currently buried w/ work and preperation for this event. Sorry, Thanks Shawn

Greatlakeoffroad

08-16-2007, 05:21 PM

ttt

toolman4x460ci

08-23-2007, 06:40 PM

Hey guy's, Shawn makes some killer stuff. here's a picture of my front diff cover and he also made my beadlocks. I run the rear gaurd as well. Props...... http://www.imagestation.com/picture/sraid225/p5a8c7488334648fc9eed66421f07ecd6/e806bcc0.jpg http://www.imagestation.com/picture/sraid225/pae420bde3287e8c8d3bfb6edadb22584/e806bcd3.jpg

sucmah

08-23-2007, 09:53 PM

any thoughts on making this for an eaton?

Greatlakeoffroad

09-05-2007, 07:50 PM

Is the pattern on an eaton not the same as the 14 bolt?

any thoughts on making this for an eaton?

Greatlakeoffroad

11-04-2007, 07:40 PM

ttt

sucmah

11-08-2007, 05:15 PM

Is the pattern on an eaton not the same as the 14 bolt?

Couldnt tell ya, i dont have a 14bolt to check.

shawn's 92

12-22-2007, 02:32 PM

hey shawn,

is this offer still available? & how are the tires working out for yea!

shawn

Greatlakeoffroad

12-28-2007, 10:15 AM

Haven't mounted the tires yet but had the one fixed for a whopping $15.00 However yeah this dela is still good call me to order 260-387-1428 Thanks Shawn

hey shawn,

is this offer still available? & how are the tires working out for yea!

shawn

Greatlakeoffroad

01-23-2008, 12:01 PM

bump

Greatlakeoffroad

02-06-2008, 07:29 AM

back to where this should be

pipehitter155

02-21-2008, 02:25 PM

i need one to 23454.....pm me a paypal addy....

Big91RustyBucket

03-01-2008, 10:32 PM

These bitch's are pimp , and hella beefy... Pictures do no justice.

Greatlakeoffroad

03-12-2008, 01:14 PM

yep, thats what I've heard. Thanks for the pimp

Greatlakeoffroad

04-23-2008, 07:22 PM

ttt

Greatlakeoffroad

05-28-2008, 11:46 AM

bump

pipehitter155

05-30-2008, 09:00 AM

do you take check through the mail???? paypal for me is messed....

Greatlakeoffroad

05-30-2008, 09:29 AM

Yes, checks, mo's or you can also call w/ a credit card we have these in stock and ready to go. Thanks Shawn

do you take check through the mail???? paypal for me is messed....

Greatlakeoffroad

06-14-2008, 10:05 AM

unbreakable and no welding needed, just bolt it on!

1TFROT

07-01-2008, 09:40 PM

Shawn, still have some in stock? I think I might get one. might as well since I'm running your beadlocks and diff covers!!!! :p

would need one for the 14 bolt.