PDA

: Welding Gas Pressure

Todd W
05-23-2005, 01:01 AM
I`m just curious what everyone uses..

Indoor - ?
Outdoor - ?
Windy - ?

:)
rusted
05-23-2005, 05:09 AM
20 indoor.
frankenfab
05-23-2005, 06:08 AM
It's not pressure, but flow rate. I use 20 cubic feet per hour indoors and out. I only weld outdoors if it is calm, because it only takes a light wind to spoil your weld.
nmscout
05-23-2005, 09:08 AM
15-20 indoor
20 outdoor
20-25 windy
SHERPA
05-23-2005, 09:40 AM
15-20 indoor
20 outdoor
20-25 windy


exactly what he said............

remember to keep the tip infront of the weld after letting off the trigger so
you get the most effect of the gas shield before pulling the gun away...
it does make a difference........

--Sherpa
GoingOffRoading
05-23-2005, 11:25 AM
17 CFM... and I turn it up and down as needed
JeepinDoug
05-23-2005, 05:48 PM
20-24 inside
25-35 outside
South San Francisco wind makes Chicago's feel like a queef. :flipoff2:
couchracing
05-23-2005, 09:17 PM
Tig 15-25
Mig 20-30
I rarely weld outside with a shielding gas. Stick or fcaw outside or on the trail. One good gust and your fighting porosity.