waterlogged
05-25-2005, 12:40 PM
Was wondering if these tools were good buys.
The Drill Press is used but works good, it has some scratches but nothing that affects the funcionality. Here are the specs and thanks for the help.
Manufacturer: DAYTON
Price: $200.00
Mfg. Model#: 4YG14
Ship Weight (lbs) 422
Item Floor Drill Press
Swing (In.) 15
Motor HP 1
Voltage 115/230 @ 15/7.5 Amps
Hz 60
Amps AC 16/8
Capacity Cast Iron (In.) 1
Capacity Steel 1/8-5/8
RPM 300 to 3000
Spindle Taper MT3
Spindle Travel 5.00
Spindle to Table 25 1/2
Column Dia. (In.) 3.00
Table Work Surface (In.) 12 7/8 x 16
Table Slots (In.) 5/8W x 12L
Overall Height (In.) 70 1/4
Overall Width (In.) 20
Overall Depth (In.) 28 1/2
Construction Rugged Cast Iron Head, Base, Table, Rack and Pinion Mechanism has Hardened Steel Gears that Raise and Lower the Table to Exact Heights, Quickly and Easily
Plasma cutter in brand new, and will cost around $400.00
40 Amp Mitec Plasma Cutter, 220 V, single phase, complete with torch, cables, ground clamp, plus other accessories as listed and shown below.
Benefits:
Powerful & efficient - max rated 5/8" steel plate.
Automatically maintains arc - great for cutting expanded steel or grating.
Long working time without overheating.
High reliability built for commercial use.
Looks great in the party dress. (Just kidding, we want to make sure you read everything!)
Can replace the necessity for multiple cutting tools such as power hacksaw, gas torch, nibbler, or cut-off wheels.
Specifications:
Max Rated cut capacity 5/8" steel. Will sever 3/4" steel in ideal conditions.
Arc maintenance device - similar to automatic cutting equipment.
Input voltage: 220 VAC Single-phase.
Input frequency: 50-60 Hz
Power factor: 0.93
Rated Input current: 15.9 A
Cutting amperage: 10-40 A
Rated output voltage: 100 V
Duty cycle: 60%
Efficiency: 85%
Thermal and overvoltage protection
Weight: 10 kg. (approx.) Shipping weight: 14 kg
Dimensions (mm): 381x177x304 Boxed: 508x355x457
Ships with:
Plasma Cutter - Inverter Unit
Ground Cable & ground clamp
Torch with 15' hose
5 extra electrodes
5 extra nozzles
Extra ceramic shield cup and swirl ring
Air filter/regulator, hose, clamps, mounting bracket
Owners manual
The inverter has a 1 Year Manufacturers Warranty on Parts and Labor. This does not include failure produced by abuse, neglect, slips and falls, or Acts of God. Like all electrical equipment, it should be protected against voltage spikes caused by events such as lightning strikes. Please do not use it in the rain. Aside from voiding the Warranty it could kill you! If upon receipt of the equipment we determine the product is covered, it will be repaired, or replaced with an item of the same or better specification. Please allow 4-6 weeks. Buyer is responsible for shipping costs.
The Drill Press is used but works good, it has some scratches but nothing that affects the funcionality. Here are the specs and thanks for the help.
Manufacturer: DAYTON
Price: $200.00
Mfg. Model#: 4YG14
Ship Weight (lbs) 422
Item Floor Drill Press
Swing (In.) 15
Motor HP 1
Voltage 115/230 @ 15/7.5 Amps
Hz 60
Amps AC 16/8
Capacity Cast Iron (In.) 1
Capacity Steel 1/8-5/8
RPM 300 to 3000
Spindle Taper MT3
Spindle Travel 5.00
Spindle to Table 25 1/2
Column Dia. (In.) 3.00
Table Work Surface (In.) 12 7/8 x 16
Table Slots (In.) 5/8W x 12L
Overall Height (In.) 70 1/4
Overall Width (In.) 20
Overall Depth (In.) 28 1/2
Construction Rugged Cast Iron Head, Base, Table, Rack and Pinion Mechanism has Hardened Steel Gears that Raise and Lower the Table to Exact Heights, Quickly and Easily
Plasma cutter in brand new, and will cost around $400.00
40 Amp Mitec Plasma Cutter, 220 V, single phase, complete with torch, cables, ground clamp, plus other accessories as listed and shown below.
Benefits:
Powerful & efficient - max rated 5/8" steel plate.
Automatically maintains arc - great for cutting expanded steel or grating.
Long working time without overheating.
High reliability built for commercial use.
Looks great in the party dress. (Just kidding, we want to make sure you read everything!)
Can replace the necessity for multiple cutting tools such as power hacksaw, gas torch, nibbler, or cut-off wheels.
Specifications:
Max Rated cut capacity 5/8" steel. Will sever 3/4" steel in ideal conditions.
Arc maintenance device - similar to automatic cutting equipment.
Input voltage: 220 VAC Single-phase.
Input frequency: 50-60 Hz
Power factor: 0.93
Rated Input current: 15.9 A
Cutting amperage: 10-40 A
Rated output voltage: 100 V
Duty cycle: 60%
Efficiency: 85%
Thermal and overvoltage protection
Weight: 10 kg. (approx.) Shipping weight: 14 kg
Dimensions (mm): 381x177x304 Boxed: 508x355x457
Ships with:
Plasma Cutter - Inverter Unit
Ground Cable & ground clamp
Torch with 15' hose
5 extra electrodes
5 extra nozzles
Extra ceramic shield cup and swirl ring
Air filter/regulator, hose, clamps, mounting bracket
Owners manual
The inverter has a 1 Year Manufacturers Warranty on Parts and Labor. This does not include failure produced by abuse, neglect, slips and falls, or Acts of God. Like all electrical equipment, it should be protected against voltage spikes caused by events such as lightning strikes. Please do not use it in the rain. Aside from voiding the Warranty it could kill you! If upon receipt of the equipment we determine the product is covered, it will be repaired, or replaced with an item of the same or better specification. Please allow 4-6 weeks. Buyer is responsible for shipping costs.