: what coils could i use?


1badb2
06-05-2005, 02:09 AM
ive got a Bronco II and in need of new coils to provide 2-4" of lift....ive looked at some stock coils like Aerostar and XJ....is there any stock coils i could use to replace my worn out lift coils?

XJ618
06-05-2005, 09:29 PM
Your prob just better of changing them for new ones, aftermarket, and if they wore out, check out your other suspension parts. If your gonna change springs, might as well go throgh the rest of your front end. Try James duff enterprise, i think they have a good selection of bronco 2 parts.

1badb2
06-06-2005, 01:03 PM
this isnt for my truck by the way....its my buddies that still has TTB..his front coils are real soft and he made some hybrid packs for the rear and the front driver side leans...he was just curious as to any coils that may lift him..i told him to try some F150 coils out.

4x4junkie
06-06-2005, 08:44 PM
F-150 coils are gonna be too much lift. You can only go 2" lift before you need axle brackets.

If this is purely to lift it a bit and he doesn't care about flex or offroad, Ranger Supercab coils would give about 1.5" on a BII, but it will ride stiffer.

If he wants any flex, then he'll need to look at 0-2" lift Jeep XJ or ZJ coils.

1badb2
06-07-2005, 04:18 PM
he already has drop brackets..his lift is enough to clear his 32's with minor rubbing and he has no trim..

4x4junkie
06-07-2005, 10:59 PM
F-150 coils should work, then. They'll really be stiff though.