i am on my honeymoon right now so i didn't have time to sit and wade thru searches.
anyway, my brother had my 95 discco and was out wheeling and the fuel pump died again. i need a new one and don't want to have to find oem. i had an after market pep boys mazda pump in it and it has only lasted six months.
can any of you guys shed some light in the form of a part number i could get at the local checker?
thanks in advance.

NAPA P7006. Sorry 'bout the Mazda failing, mine is running strong.

I would check into the Airtex part #E3240 which is also sold under the Master Brand. I ran into problems with incorrect deadhead and running presures with other generic pumps resulting in slow starts and poor running.

This one matches, I know because I called the techs up and rattled their brains. I have one installed and working great. The truck runs better than with the genuine pump.

Enjoy your honeymoon!

Anyone else find it funny that the dude's on his honeymoon and looking to Pirate for pumping advice? :flipoff2:


(this thing on? Well, I'll be here all week, enjoy the veal, remember to tip your waitress) :D

are you're tired of making the wheel round? You might find that PRC8318 (http://www.landroverparts.us/LandRoverDiscovery/disco_cat_pages/disco1cat.pdf) works pretty well :shaking: :flipoff2: :flipoff2:

So what is the actual technical specs of the stock pump? I'm working on replacing the stock inside one with an outside one.

Thanks.

I think deadhead is 37PSI and running and running is 75PSI... Someone correct me.

I think deadhead is 37PSI and running and running is 75PSI... Someone correct me.

Might be pump pressure, but you'll never find it that high in the real world in a Rover.

The injectors max flow is about 175 ml/min/ea. You'll need a minimum pressure of about 35 psi.

Paul! Answer your damn phone. I know your awake. :flipoff2:

:shaking: jumped the gun, what happens when troubleshooting over the phone from 1500 miles away.
turns out the ground wire came off of the pump IN THE TANK :D . silly trail carnage.....
mazda pump running good as ever.
thanks for the help and smart ass comments. :flipoff2: