|
: What have you done to coat your fenders? orbitcat 02-28-2002, 10:22 PM I called the local Line-X guy. He wanted $75 per fender well. That sounded a little pricey, but I didn't know what to expect. What have you done to protect your inner fender well and how much did it cost? I figured a dirty black fender well would look better than a dirty white fender well. Josh 89XJ 03-01-2002, 12:17 AM Krylon Flat Black....$2.99 a can :flipoff2: If you really wanted the liner stuff though, give a quart of Herculiner a shot, but put it on with a smooth brush so that it doesn't get all textured to hell. Helps keep the mud from sticking like crazy. Cutter 03-01-2002, 07:22 AM hurc u liner, but like Josh said, it will get dirt in the texture thats a bitch to clean...if you don't stir it, it'll be pretty smooth... doctor_G 03-01-2002, 07:42 AM I used POR-15 and Chassis coat black. Not saying its the best choice, Too early for me to tell. Just did it last weekend. Weezer 03-01-2002, 08:27 AM I went down to local parts store and grabbed a couple rattle cans of undercoat. It sprays on like tar and set up nice. It isnt as strong or thick as rhino or linex but its far cheaper and is easily touched up. I think it was $5 bucks a can, and 2 cans did all 4 wheel wells. redruM 03-01-2002, 08:36 AM i used the rattle can bedliner for 7.99/can smooth finish as thick as you want 2 cans=4 fenderwells twistedspline 03-01-2002, 10:58 AM I cant belive im the first to say it..... What fenders mine rusted out a long time ago:D I say cut them out before it happens to you. Rat Patrol 03-01-2002, 02:30 PM 3-M rattle can undercoating. Sticks good, covers great, fairly smooth finish. thats my 2 cents. -Jeremy | |