Well have decided to sell the project,

1993 YJ Tub, hood, grill. Good condition no rust, clean AZ title. Rear has been cut for big tires. Frame has been striped and boxed from fire wall forward with .250 plate. Rear has a new crossmember/hitch for XJ rear springs (4" longer and super flexy). Has xj springs in back, with new rancho 2.5" springs in front. has a 6 point cage full cage. Steering box, and coulum. Can throw in a couple of RCI(plastic) seats with covers if interested.

Mounted on a hp ford D44 and a Dana 60 with no brakes in back, these are strictly builder, roller axles. have all parts to complete front, not sure about gears, front is stock, back is probably stock but might be 4.56's (guy I bought if from told me), not even sure if the gears are ok. Like I said builder axles.

4 38 TSL swampers with maybe 20%, but very good were pattern, the fuzzy's are still on the sides.

For all the above $1000 will not part out unless I can sell the tub first, but like I said, the axles, I wouldn't put more that a couple of hundred value on.

Also if you buy the tub I'll throw in a 4 bolt 350 crate motor(260hp/350tq) was told it has less than 50k miles on it. pulled it apart, cleaned and seasoned block, installed all new felpro gaskets, looks good inside, no scoring on cylnder walls has a brand new performer intake
$400 with tub
$500 without tub

email for pics

steve@desertskyphoto.com