|
Fordfanz 06-11-2005, 05:13 AM ok I want to buy this crew cab its 4x4 it has a 460 in it its suppose to be a manual tranny but someone put a auto wit h a Floor shifter in it .It still has the clutch pedal in so I wanna make it manual again .My question is what is the Technical name for the 5 spd tranny ZF??????? Wwill a tranny out of a 95 f-250 w/351 5 spd whork on the 460 ???thanks for the help Fordfanz MikE1 06-11-2005, 07:37 AM I have done the swap on a 89 F350 with 95 powerstroke parts The tranny is a ZF 5 speed, and the 351 trans wont work Fordfanz 06-11-2005, 09:18 AM I have done the swap on a 89 F350 with 95 powerstroke parts The tranny is a ZF 5 speed, and the 351 trans wont work So I need a ZF 5spd ?? Fawk Awph 06-11-2005, 10:44 AM you need a ZF5 speed from and truck with a 460. each ZF5 has a different integrated bellhousing for each block (300, 351, 460 etc.) it shouldnt be too difficult to find a transmission to swap this back. Callen VerticalTRX 06-11-2005, 01:02 PM The technical name for it is a Mazda ZF S5-42 5-speed, or Mazda ZF S5-47 5-speed. The S5-42 had an input torque rating of 420lb-ft and the S5-47 had an input torque rating of 470lb-ft. I believe both were available behind the 460's, with the ZF S5-47 coming in in the later years of production. 300Puller 06-11-2005, 07:08 PM The technical name for it is a Mazda ZF S5-42 5-speed, or Mazda ZF S5-47 5-speed. The S5-42 had an input torque rating of 420lb-ft and the S5-47 had an input torque rating of 470lb-ft. I believe both were available behind the 460's, with the ZF S5-47 coming in in the later years of production. It ain't no stinking Mazda. ZF is the maker. VerticalTRX 06-11-2005, 07:25 PM Maybe I'm wrong here (wouldn't be the first time), but I thought that the ZF trannys were from a division of mazda, IDK. 94stepsideford 06-12-2005, 06:41 AM NO. ZF makes their own trannies. They also make AWD trannies Lars915 06-12-2005, 07:14 AM ZF Friedrichshafen AG Based in Germany, worlds largest independent specialist in driveline and chassis technology according to their website tsmall07 06-12-2005, 08:01 AM ford trucks came with mostly mazda transmitions but the lucky ones got the zf built. zf trannies have a pto on the side, a granny low, and angled ribbing. the mazda has ribbing that is at 90 degrees to the tranny. MikE1 06-12-2005, 09:16 PM ford trucks came with mostly mazda transmitions but the lucky ones got the zf built. zf trannies have a pto on the side, a granny low, and angled ribbing. the mazda has ribbing that is at 90 degrees to the tranny. The F150 was the only full size Ford truck to get the Mazda 5 speed, everything else got the ZF Jrod-13 06-12-2005, 09:26 PM The mazda M5OD-R2 was found in F-150's and F-250's, behind 300's and 302's the ZF was only in F-250's and F-350's, behind 351's, 460's and 6.9/7.3's However, there was some very rare F-250's with a 300 in them that had a ZF in them. I've heard of two of them, and one is in my driveway. adrianspeeder 06-13-2005, 07:09 AM The mazda M5OD-R2 was found in F-150's and F-250's, behind 300's and 302's the ZF was only in F-250's and F-350's, behind 351's, 460's and 6.9/7.3's However, there was some very rare F-250's with a 300 in them that had a ZF in them. I've heard of two of them, and one is in my driveway. Ding ding ding. Wow, you have a 300 ZF? Thats cool. What year? Adrianspeeder tsmall07 07-03-2005, 08:57 AM i've heard that there were also a few f150's that got zf. if its there there was not very many at all. saf-t scissors 07-03-2005, 03:39 PM If its's a 351W and a 5spd, it's a ZF. It doesn't matter what chassis it's in. primeredbronco 07-03-2005, 05:02 PM i thought the bolt patterns were the same for the 300 351 and 460. doc70sub 07-03-2005, 05:14 PM 300, 302, & 351W are the same bell pattern & 460/429/400/351M are the same pattern. Dc primeredbronco 07-03-2005, 06:46 PM learn somthing new every day. thanks doc doc70sub 07-03-2005, 07:27 PM Glad to be of some use for a change! ;) Doc Jrod-13 07-03-2005, 11:44 PM Ding ding ding. Wow, you have a 300 ZF? Thats cool. What year? Adrianspeeder It's a 88' F-250, LD, bare bones model, ex. railroad truck.(I got the whole truck for $275) The other one I've heard of was a guy out in oregon, same deal, 88' F-250, LD strip model. FWIW, my buddy also has one in a 91' bronco, but he swapped it in.. went from a 302/E4OD, to a 351/ZF.. That bronco flat out hhaaauuulllsss.. tsmall07 07-07-2005, 05:56 PM did they ever put a zf6 in a ford truck with a small block? if so is it the same years as the zf5? i want one of those :smokin: Fawk Awph 07-08-2005, 08:59 AM i believe when they went to the zf 6 it was in 98, and they had already stopped making the 302/352/460 line of motors and moved from manuals to strictly auto much like chevy has done. although, you may beable to find the manual that they put behind the new V10, i really dont know much about fords new line of trucks. Callen adrianspeeder 07-08-2005, 10:05 AM The ZF6 came about with the superdutys in 99. Guys have put them into earlier trucks though. Cool deal on that truck Jrod-13! Adrianspeeder tsmall07 07-10-2005, 09:59 AM i just found a zf5 for my 302 out of an 88 for $500. i think i'm goin to jump on it | |