Hello,
I'm looking for an F350 4x4 track/panhard bar. Year not important.
Thanks,
Mikel

All f350's except 2005 are leaf spring so no tracbar. You might get one from a 77 to 79 F-150 or bronco. I have one if you need it PM me.

They DO have track bars in the front, besides having leafs. I've crawled under a few trucks, and my Ford HP D60 (from an 88 F350) had a mont for one. Unfortunately the arm had been torched off.

I think you are talking about a sway bar that limits flex. People torch them all the time. Tracbars are used to center the axle right to left on coil spring trucks.

Correct me if I'm wrong.................. but I have a "tracbar?" in the front of my 97' F350. It mounts in the center of the crossmember and mounts at the rear of the U bolt plate under my passenger side leaf packs....................... just to the side of my swaybar mount.

:beer: :beer:

Some vehicles with leaf suspensions have track/panhard bars for better handling. I know the difference between one and a sway bar :)

I think you are talking about a sway bar that limits flex. People torch them all the time. Tracbars are used to center the axle right to left on coil spring trucks.

F-350 4x4 dana 60 front leaf sprung truck has a track bar,
Observe, evaluate, and overcome..... :flipoff2:

Mike is right. My 1999 F350 has a trac bar on the front axle.

Hey, I'm in New Haven too, Mon through Thurs during the day :D

there's 2 different trac bars for the 99-04 f250/f350...not sure which size bolt but i know what size socket fits both of them...the bigger one is 1-3/16 socket and the smaller one is 18 mm...i don't know if you need to put this back on a F350 but if you do look at your trac bar bracket and measure the hole....i usually throw them away when i do a lift and put adjustable trac bars or trac bar relocating bracket on them but i may have kept a few...just need to know size of holes....

Sorry Gumbi.........they gots bars :)