|
RufusTheRam 03-01-2002, 04:39 PM just completed, 6 inch skyjacker and 3 inch body, 39.5x15 mickeys. 1 tons loaded with 4.88's in the next couple of weeks. http://www4.ncsu.edu/~icsealey/rc/rcbig.jpg http://www4.ncsu.edu/~icsealey/rc/rcbignight.jpg heavymetalrob 03-02-2002, 08:17 PM dood that is a sweet RC. where did you find the 6" skyjacker at? and how much. right now i have a 4" skyjacker w/ 33" bfg's but i want bigger! heavymetalrob 03-03-2002, 04:56 PM i only have one picture of it right now.http://lw12fd.law12.hotmail.msn.com/cgi-bin/saferd?_lang=EN&hm___tg=http%3a%2f%2f64%2e4%2e18%2e250%2fcgi%2dbin %2fgetmsg&hm___qs=curmbox%3dF000000001%26a%3da5cc99e728c90c8 9f5eeddedcf8d14c1%26msg%3dMSG1015202706%2e18%26sta rt%3d1288%26len%3d24122%26mimepart%3d5%26disk%3d64 %2e4%2e18%2e72_d179%26login%3dheavy_metal_rob%26do main%3dhotmail%2ecom&hm___cacheh=1&hm___fl=attrd&domain=hotmail.com this is it... a 1987 ram charger. i got it from my moms friend for $1500. it runs great only needed a few seals and gaskets. i need to rebuild the carb as well. it has a 360ci. heavymetalrob 03-03-2002, 05:01 PM ahh come on it didn't work!!!!! :confused: :flipoff2: :mad3: :flipoff2: :confused: :mad3: :mad3: well if you want to see it go to www.offroadoutlaws.com click on "crew" i'm on the bottom. RufusTheRam 03-03-2002, 07:05 PM hey, the lift came from national tire and wheel. we were going to do an 8 inch and either no body or just 2 inches, but decided 2 more inches in the susp. wasn't worth the extra hassle of lengthening d-shafts, etc. should have gone with the 8 now that d-shaft work will be needed with the 1 tons anyway...:rolleyes: BigNBlown 03-04-2002, 03:12 AM And we know what happens when Ivan changes axels :nuke: ;) FULLSIZE 03-10-2002, 05:43 PM plus the smaller arch of the 6" springs are more compliant than 8 inchers. better ride and flex with the same spring rate:D | |