Hi, I am looking for some FJ60 knuckles for a disc brake conversion. I need all the necessary parts for the conversion. I am located in Arcata, ca but could also pick up around the Dixon, CA area.Thanks a lot. :)

Just so you know, fj62, and toyota 4x4 pickup truckl from 79-85 will work for you as well. They all use different tie rods than your 40 series though....

I think 3/79 FJ40 and up are the same as the FJ60/62.

I think 3/79 FJ40 and up are the same as the FJ60/62.

I believe you are correct sir...

Thanks guys I forgot that the 62 knuckles work as well. Correct me if I am wrong, but I thought that the 79+ LC setup is stronger than the mini truck setup.

Thanks guys I forgot that the 62 knuckles work as well. Correct me if I am wrong, but I thought that the 79+ LC setup is stronger than the mini truck setup.

The 79 & up has the same stong knuckle pattern, but better brakes than the mini-truck (non-vented versus vented rotors)

If you can find the 79'+ FJ40 knuckles, they are preferred as your tie rod will fit the steering arms, FJ60/62 & mini-trucks will require custom steering mods or replace the steering arms with those from a 79+ FJ40 ($100 for both arms ;))

Hope that helps... :D

Thanks Kurt for the help.

PM mantis, He has a complete set of 60 axles you can get on the cheap, or if you just want the knuckles he might just sell you those. :D

Thanks for the heads up. :beer:

anyone?