mongrel
07-03-2005, 04:38 PM
will they interchange?
|
mongrel 07-03-2005, 04:38 PM will they interchange? pcoplin 07-04-2005, 04:39 PM Stock slip yoke, no. Yes if they have a 1310 SYE. if they are the same length. Although beware, the pinion side on some 4 cylinder rears have a 1310/1350?? hybrid joint. xtusseryx 07-05-2005, 06:42 PM Stock slip yoke, no. Yes if they have a 1310 SYE. if they are the same length. Although beware, the pinion side on some 4 cylinder rears have a 1310/1350?? hybrid joint. Some have a 1330 yoke but it is not hybrid. otisdog 07-06-2005, 08:43 AM I know that my 95 YJ had a different u-joint on the front of the rear driveshaft. The rear was 1310 if I'm not mistaken - the front I'm not sure. I believe all 95's and some 94's were this way. jim redsandman6 07-07-2005, 09:59 PM i know with the yj the 4cly driveshaft is 2" shorter than the 6cly driveshaft best bet is just get a driveshaft made at a driveshaft shop | |