View Full Version : ~~~3/4 Heims BLOW OUT SALE! ~~~ Tube inserts!
3/4 heim (rod end) 3/4 through hole, 3/4-16 threads, huge teflon/KEVLAR inserts. Moly alloy! Rated over 28,000lbs each. Not cheap chinese rod end supply ends either!
CHEAP!!, PM FOR PRICE
Here is a link to our webstore for more info
http://www.bulltear.com/catalog/index.php?cPath=28
http://i2.photobucket.com/albums/y29/bulltear/b0f99977.jpg
Tube inserts PM FOR PRICE!
JEEPRZ
09-03-2005, 03:48 PM
Can you make 7/8" x14 TPI inserts for a 1 1/8 ID tube? Right and left, no jam nuts.
Can you make 7/8" x14 TPI inserts for a 1 1/8 ID tube? Right and left, no jam nuts.
Just 2?
JEEPRZ
09-04-2005, 07:12 AM
yes, only need 2, one right, and one left
I think Keithflux has some in stock
Another happy customer
http://i2.photobucket.com/albums/y29/bulltear/future.jpg
mrnaynay
09-23-2005, 05:16 PM
what size tubes do the tread inserts fit... pm me
1" 1.125" 1.25" 1.3125" 1.375"
mr.tech
10-09-2005, 09:52 AM
8 3/4 x 16 (4 right 4 left) with insert for 1.5 x .250 wall DOM so they need to be 1.5 OD 1.0 ID. to 76248 keller TX.
motorcitydak
10-09-2005, 01:14 PM
just curious, do you have any of them (3/4x3/4) rated more than that? Maybe about 40k or so?
8 3/4 x 16 (4 right 4 left) with insert for 1.5 x .250 wall DOM so they need to be 1.5 OD 1.0 ID. to 76248 keller TX.
pm sent
madcowdungbeetle
10-14-2005, 08:38 PM
MC,
Your PM box if full, I have some I need to discuss with you.
pm sent....and box cleared out
whoa overstock!!!!!!
These are great for steering and suspension links!!!
XJ_ranger
12-05-2005, 08:25 PM
what about some 3/4" bore with a 7/8" x 14 shank?
I need a spare
thanks!
what about some 3/4" bore with a 7/8" x 14 shank?
I need a spare
thanks!
Right or left hand thread, we have both in stock. Please pm me
michigander
10-09-2006, 09:18 AM
PM sent!
zachv
10-10-2006, 11:00 AM
Another order for you, MC. Thanks for offering a great product at a great price.:cool2:
outlawcrewcab
11-20-2006, 10:13 AM
i need weld in inserts that are 1-1/8 x 7 do you have anything?
Trailduster79
12-05-2006, 07:09 AM
Do you have any 3/4 x 3/4 that are rated around 40K?
v8jeeptj
09-14-2007, 02:04 PM
can you make 24x1.5 tube inserts for 1.25 pipe
can you make 24x1.5 tube inserts for 1.25 pipe
1.5" thread for a 1.25"ID pipe? They will be long but yes we can make them and any other thread you need.
jedrattle
09-23-2007, 11:27 AM
3/4 heims... 1 left and 1 right...plus tube inserts for 1in id shipped to 92505
sn0border88
09-23-2007, 02:06 PM
4 heims and inserts for 1" id tube. 2lh 2rh thread, shipped to 18964.
hardline04
09-30-2007, 09:00 PM
Price on a couple 3/4 5/8 right hand heims shipped to 35640
Cush00
10-02-2007, 08:01 PM
How bout 8 3/4 3/4 heims, 4 right and 4 left w/ inserts to 95973
Txzuki
10-03-2007, 07:53 PM
8 3/4 x 16 (4 right 4 left) with insert for 1.5 x .250 wall DOM so they need to be 1.5 OD 1.0 ID. to 76248 keller TX.
Same quote please. Only to 76071. Thanks.
vBulletin® v3.7.3, Copyright ©2000-2008, Jelsoft Enterprises Ltd.