I want to use stock ends for my high steer setup and it looks liek I will be selling a few of the arms so i think i might be able to afford to buy the reamer. But.... I dont know which one to get.

I am useing waggy rods ends if that helps.

anyone know which size and where to buy from cheap or at least a decent price?
Thanks

I got mine from Speedway motors in Nebraska for about 70 bucks . It works fine and seems to be good quality.

I bought mine at the local industrial hardware shop for under $20. I bought a Hanson hand reamer and slapped it in my bro's drill press and dropped the speed real slow and reamed a few holes. I forget exactly which Hanson it was, maybe 14-1/2, but it was for the Chevy 1/2, 3/4 tre's. I can't remember exactly which one, but that is how I did and worked flawlessly.

You want a reamer with a taper of 1.5" per foot.

Here's the Speedway one - as stated 1.5" per foot

http://www.speedwaymotors.com/product.asp?source=&base%5Fno=91089411&str%5Fbase%5Fno=91081035%2C91089411%2C&header%5Ftitle=Keyword+Search&page%5Fname=search%2Fkeyword%5Fresults%2Easp&search%5Ftype=reamer&size1=&size2=&gender=&ShowImages=yes&sq=0&cont=1&intPgNo=1&mscssid=KP62JEUSG1LF9MBDWR4HLED1XS1BA958

Wow, long link. :eek:

what size is the reamer that you would need for 1 ton dana 60 ball joints.would it be the 2"/PF reamer or a different one

Are all the rod ends the same on the waggy steering? (ie pitman arm to drag link, knuckle to tie rod)

That's what it was 12-1 1/2
1 1/2 per 12. I just couldn't remember and it is at my parents house.