ok yes dumb quesion but i kinda need to know im going to look at a ff 60 today and i was just looking for rims from tech 1 and all they have available is 16"

what are you guys doing for rims?

what i want is a black 15x10 (since im not buying new tires i just got these 38's) i was looking to get 5 or 5.5" of backspacing cause the axle is 65" wide. if its do able where can i get em?


thanks guys lemmy know what you guys know

It should fit just fine, if it's available in 8 bolt.

Summit has them, about $30 per rim, your choice of backspacing

you don't have to worry about going to a larger rim until you get to a 14 bolt. then, you can still grind away to make a smaller rim fit.

kick ass

thanks guys

im going after the massey modo


60's 60's 60's
sold me 44's

muahhahah

DP-

Call the wheel company and ask them what the drop center bore measurements are on the wheels they are selling. Figure what your dcb is and compare the two and see if it will work for you.

For example, eaton has extra HD steel wheels and their dcb is 13.50". (They take 2-3 weeks for the custom backspacing.) Stockton has only 13" dcb and take 6 weeks for custom bs. Their rims are too weak for rocks; unless you are really good with a hammer. Their GVW per wheel is only 1600 lbs as opposed to Eaton's 2,800 lbs. Huge differences for rock crawling....

I have only been able to find 5" backspacing w/o having to get custom wheels made. Let me know if you find a stock +5 backspacing...I need 'em too!

How about we get some Hummer wheels? 7" of backspacing!

I need eight lug beadlocks and want 3" backspacing. Someone tell me where to get them with out getting raped.

I need them for my 14 bolt and HP60

I got mine from Rockstomper (15X10) with 3" BS. I went for the button heads too.

Thanks cochese, I'll give them a call today.

How much did you drop on those buggers?

Originally posted by aaronlosey
you don't have to worry about going to a larger rim until you get to a 14 bolt. then, you can still grind away to make a smaller rim fit.

:confused: Then how come I had to grind the piss out of my 8 lug D44 to make a 4.25 BS 15x10 rim fit?

Mine fit fine. 6-Lug.

http://community.webshots.com/storage/1/v1/2/44/44/30824444wUibhEZXfc_ph

Jeeper

I am going to venture a guess, but that 44 you are talking about is a FRONT axle. They are talking about full floater REAR axles....

How much did you drop on those buggers?

Back when I purchased mine, I think they were like $130 for the black rockcrawlers plus $10 for the button heads + shipping ($80). Now I think the prices are up like he said he was going to do after Xmas. An extremely good product though. Very beefy.

If u are getting a ford 60 15 will not fit with stock brakes, chevy 3/4 to will work....