Clevice Ends for Hydro Steer Cylinders

[Station]

I have had alot of people call me looking for these specifically ( I have made a little over 1500 of these now) , and alot of compliments on their design and finish , so I thought I would post these here to make their availability more known.

These are made for steering cylinders with 3/4" - 16 tapped shafts , and are made for both 5/8" and 3/4" bore rod ends.

Pictured is a 3/4" bore clevice end with a 3/4" x 7/8"(shank) rod end.

The hardware included with these clevice ends is all yellow zinc plated ( some will appreciate how hard it is to get some of these bolts plated) and consists of :
1 - 3/4"-16 x 2" Alloy Socket Head bolt
1 - 3/4" or 5/8" x 1.75" Shoudler bolt
2 - 3/4" or 5/8" rod end spacers
1 - 1/2" or 5/8" Grade 9 Stoverlock lock-nut ( These are sized smaller because of the way a shoulder bolt is made - see pictures )

The clevice end itself is CNC machined from 1020 Mild Steel.

Normally I sell the clevice ends for the price of $80 a set without the purchase of a steering cylinder and $65 a set with the purchase of a cylinder. A set consists of 2 complete clevice ends with hardware; everything you need to complete one double ended steering cylinder.

For this introduction I will be selling the clevice ends by themselves for $65 a set.
( UPDATE: Clevice ends are now $85/Set when purchased without a cylinder , the newest clevice ends are completely plated so that it is not necessary to paint them.)

I can accept payment by check , M.O. , Visa , or Mastercard .

http://www.pirate4x4.com/forum/attachment.php?attachmentid=198184&stc=1 http://www.pirate4x4.com/forum/attachment.php?attachmentid=198188&stc=1

For more info you can either shoot me a PM , e-mail at Sean@PerformanceOff-Road.com , or call me at 334 567 7229 (Please leave a message if I do not answer , as I stay really busy on some days and am forced to stay away from the phone for long periods).

Thanks,
Sean

[OneTonK5]

them bitches is bling

[Station]

Another thing to note, that with the socket head bolt that we are using, this clevice end is made AS SHORT AS POSSIBLE. Alot shorter than some of the other ones being sold out there.

These are made so tight that the body of the rod end actually goes inside of the socket head by about .060" .

Sean

[Station]

Top

[JamisonWorkshop]

Station I left you a message via phone. Like to get a set. Mike

[Station]

Thanks for the orders !!

Sean

[Station]

Top

[mucknet]

Whats the diameter on these?

[Station]

Whats the diameter on these?

They start off as a 2" O.D. material but because of all the machining on them , they only remain at that diameter at the two round sides next to the base where the bolt to the cylinder. You have the bolt head/wrench flats that go down the whole length , and then you have the slot cut down the inside which together reduce the outer dimension of the cevice end for the rest of it's length.

Sean

[Dan Dibble]

Very nice call me,

BIG news

Dan

[Todd W]

Sean I don't know whats going on!

I spoke with you last week you were going to call me back the same day and you never did.

Since then I have e-mailed you, and called almost every day... I thought we were `cool`... but it's been a long time since i`ve talked to you and I still don't have my parts. Supposedly you didn't have any of these clevis ends when I ordered but your post never mentions running ou. I lost your cell# so I have only called your business #, and left messages.

I need my stuff man please atleast call and let me know what's going on here.

-Todd

[MRJ]

Sean I don't know whats going on!

I spoke with you last week you were going to call me back the same day and you never did.

Since then I have e-mailed you, and called almost every day... I thought we were `cool`... but it's been a long time since i`ve talked to you and I still don't have my parts. Supposedly you didn't have any of these clevis ends when I ordered but your post never mentions running ou. I lost your cell# so I have only called your business #, and left messages.

I need my stuff man please atleast call and let me know what's going on here.

-Todd

I spoke with Sean on Tuesday. He has a lot of stuff going on with his Grandmother right now. As soon as he has some time I am sure he will give you a call.

[Dan Dibble]

Yes his grandmother is haveing bypass surgury.

Dan

[Todd W]

Yes his grandmother is haveing bypass surgury.

Dan

O.k Thanks.

[mark.bales]

I have been waiting on a p-style pump from sean since 11-07-05:zzz::eek:

[Dan Dibble]

Call him he is back in the shop

1-334-567-7229

[Todd W]

Yep talked to him this morning.

[Station]

O.k Thanks.

Just for an update on this , I talked with Todd this morning and got everything cleared up with him . Todds parts actually shipped out last Mon. but thats all I had time for was to get all the shipments out for the limited time I was here, and did not have the time or the ability to call from the hospital where I have been all week.


Thanks for being understanding about the whole thing , Todd.

Sean

[Station]

I have been waiting on a p-style pump from sean since 11-07-05:zzz: :eek:

I'm sorry that you have had to wait for so long for it , but whether you want to believe me or not, you would not have been able to recieve a HI flow P-pump from any other well know vendor during that period of time either. Delphi is at fault for all the vendors not being able to build those pumps for awhile. It has nothing to do with me :zzz: .

Sean

[Station]

Also , I see my yellow star has expired while I have been away , I need to fix that!

Sean

[mark.bales]

I do need to say this, I LOVE all my full hydro stuff I got from Sean it's super beefy and very nice looking. I'm just mad at Delphi for taking so long on pumps:shaking:. Sean call me I talked to PSC they said they would have pumps on the 1-26-06.:cool2: Sean I know that this is NOT a result of you :zzz: call me.





Thanks Mark :) :beer:

[Dan Dibble]

Testimonial to the strength

http://www.pirate4x4.com/forum/showthread.php?t=444829

[dotrappe]

Sean,

I need a set for 3/4" x 3/4" rod ends. Is the $65 price above still good?

Thanks,

Dave.

[Station]

PM sent! Thanks for the interest.

Sean

[dotrappe]

Ordered up and I'll look forward to them next week.

Thanks again,

Dave.

[dotrappe]

Got the clevices! Very nice fit and finish! All the hardware is very nice as well. Top notch all the way!! I need to uprade my allen wrenches, those allen-heads are huge!

Thanks again,

Dave.

[SBChero]

pm'd ya

[iroc-cj]

PM sent.

[SBChero]

???

[Dan Dibble]

Sean has dial up

call him

334 567 7229 8am-5pm central, you normally have better luck in the early am.

Dan

[Station]

PM's sent , sorry about taking a bit guys, things have been hectic over here to say the least....

Sean