Station
07-22-2005, 02:09 PM
I am making a special sale price for these small displacement orbitrol valves, because I have become majorly overstocked on them. The valves are Danfoss brand, load reactive , displace 4.8 cu.in / rev. and work great for rigs with shorter steering rams like what you would find on a Toy axle.
With a 2" bore 1.125" shaft single ended cylinder , you should expect around 3.5 turns lock-lock in one direction and 2.5 turns lock-lock in the other.
With a 2.5" bore 1.5" shaft double ended cylinder you will have around 3.5 turns lock-lock in either direction .
The reason I say you will have "around" X many turns is because the actual number of turns is going to be dependant on your steering arms, and exactly how much cylinder stroke you are using. I just calculated them for an average stroke length for these axles of 5.5".
If you have any questions about how this valve would work with any other cylinder that you have in mind just ask.
These valves have proven to work well with unmodded Toyota and Tracker/Swift pumps.
The price for the valve is $260. They are normally $310 . With as many of them as I have , I should be able to make the sale last untill new years .
The input shaft shown in the pictures is a 3/4" 36 spline , and the housing length is a stubby 1.75" . These work great for connecting the valve to your vehicles current steering column as they take up very little space , and spline adapters or u-joints are easily found to adapt to this spline(I also have both straight spline couplers and U-joints available if you need them).
The price for the input shaft is $42
If you have any questions please feel free to ask.
I accept Check, M.O. , Visa , Mastercard payment.
http://www.pirate4x4.com/forum/attachment.php?attachmentid=198257&stc=1
http://www.pirate4x4.com/forum/attachment.php?attachmentid=198258&stc=1
Thanks,
Sean
With a 2" bore 1.125" shaft single ended cylinder , you should expect around 3.5 turns lock-lock in one direction and 2.5 turns lock-lock in the other.
With a 2.5" bore 1.5" shaft double ended cylinder you will have around 3.5 turns lock-lock in either direction .
The reason I say you will have "around" X many turns is because the actual number of turns is going to be dependant on your steering arms, and exactly how much cylinder stroke you are using. I just calculated them for an average stroke length for these axles of 5.5".
If you have any questions about how this valve would work with any other cylinder that you have in mind just ask.
These valves have proven to work well with unmodded Toyota and Tracker/Swift pumps.
The price for the valve is $260. They are normally $310 . With as many of them as I have , I should be able to make the sale last untill new years .
The input shaft shown in the pictures is a 3/4" 36 spline , and the housing length is a stubby 1.75" . These work great for connecting the valve to your vehicles current steering column as they take up very little space , and spline adapters or u-joints are easily found to adapt to this spline(I also have both straight spline couplers and U-joints available if you need them).
The price for the input shaft is $42
If you have any questions please feel free to ask.
I accept Check, M.O. , Visa , Mastercard payment.
http://www.pirate4x4.com/forum/attachment.php?attachmentid=198257&stc=1
http://www.pirate4x4.com/forum/attachment.php?attachmentid=198258&stc=1
Thanks,
Sean