PDA

View Full Version : BILLET PTO Cover /w Fill Plug - Laser Etched!


NorthWestFab
08-01-2005, 11:43 AM
We've made our adaptor kit even better - we're now including a 6061-T6 Billet, Anodized and Etched PTO cover to allow proper filling of the NP203 Range Box!

http://www.northwestfab.com/images/laserpto.JPG

But these beaties have more uses than just for a 203 range box!

They can be used as a Fill plug for your NP205! Why do I need another fill plug?

Let me explain...

On the back of your NP205, you will find two pipe plugs; One to fill and one to drain. The upper fill plug is set to allow the correct amount of 80-90W oil to be filled into your np205, however when mating a NP205 to a NP203, often the NP205 is clocked up for gound clearance, however this also rotates your drain and fill plugs, and your upper fill plug may not be allowing enough 80-90W into your case! Installing these beaties on the PTO cover of your NP205, you cna be assured you will be able to get the correct amount of gear oil into your NP205 (approx 4 quarts) for a nice long life.

Oh and they look :grinpimp: too!

$29 + shipping!!

(customers who purchased our adaptor kit previously and did not recive this cover may purchase for $15).