paint is all done, warn shafts, ctm joints, warn heavy duty upgraded spindles, moog enhanced balljoints.... all just put in... got to put the poly tranny mount in, front spacers (should be here tomorrow) and then my hydro assist steering needs fabbed in.... got spare spindles, 3 warn stubs, 760 joints, 2 spare hubs, 2 spare short sides, one spare long side... ordering spare rear shafts, and front and rear d shafts.. (jess of course) warn hs9500 is on the way, cut and brace some of my controll arm mounts and rear trac bar............. im ready! :D

cant wait to put that warn in the space where the slow ole rep 8000 used to sit

a few more pics

Nice color :rolleyes:

Otherwise, that thing should wheel like :vader:

-J

a speacial thanks to BOTH brians for all there help, you too AL... if it wasnt for them it would still be sitting here black, with out the new parts in..... blew out my back was gimping for the last 2 weeks............. thanks again guys.... youll get your paybacks!


are you reeeaaady :D

,

:rainbow: :barf:

aussie, aussie, aussie......

haha, love the colors, just happen to be the aussie colors.

So Badass, can you give me a rund down on the specs as they stand now. I was talking to you a while ago but haven't been around much. Moved OS and put the jeep in storage for a year or so. Still trying to hit the boards though.

thanks

zach/aussietj

sweet lookin rig, but not down w/ the John Deer :rolleyes:

A Packers fan in the Steel City. :shaking head:




Hopefully I'll get my junk done so we can stack 'em.

I LIKE IT!

Apparently some of these people haven't heard that they only thing that runs better than a deere is a BADASS jeep paint JD green. :flipoff2:

Nice rig

Nice colors, go Springboks! (Rugby reference).

Seriously, the truck looks nice, but aren't you going to need to either trim the rocker panels, or add some reinforcements? Looks to me like they would get mangled in the current configuration, the sidebar is mounted too high? Just curious, I'm sure you got it covered.

Originally posted by 60seriesguy
Nice colors, go Springboks! (Rugby reference).

Seriously, the truck looks nice, but aren't you going to need to either trim the rocker panels, or add some reinforcements? Looks to me like they would get mangled in the current configuration, the sidebar is mounted too high? Just curious, I'm sure you got it covered.

He has Currie (I believe) rocker guards on it.....

I think it looks cool, I might steal your fender/cag set up ;)

Originally posted by Welby


He has Currie (I believe) rocker guards on it.....


mmm hmmm slightly altered currie gaurds :D


that tube is also tied into the runner inside the jeep which is connected to the leg bone..... im mean its all tied in :D

Originally posted by Keith Strong
I think it looks cool, I might steal your fender/cag set up ;)


steal, use all ya want, hell thats what this bb is to me... new ideas... a little from him a little from the other,,,,,,, and absolutely fawkin none from quite a few.... :D

yeeaahh!!

I knew it ... I knew it was gonna be JD colors!

:D

HD spindles? tell me more

HD spindles?... YEAH do tell us more!!

Warn?

Gotta love the Packers colors :cool2:

Squash

Originally posted by welndmn
HD spindles? tell me more

well i broke one about 7 months ago..... i called a big warn distribtor, and he said there were some breakage issues so warn made spindles out of better material and they are heat treated..............to replace both with all new bearings and such they wanted 500 or so $ i said piss on that........ he said he sweet talked warn and made a deal.... if i pay shipping they will send me the enitre kit... i said for how much? he said for shipping... i said SHIP THE SOME BIATCHES and walla heat treated better alloy spindles :D


note.... they were not too happy bout 39 inch tires though....

looks good
are you gonna compete in it? if so when and where?

Originally posted by fcfred
looks good
are you gonna compete in it? if so when and where?


yes im gonna compete..... in a bunch of local shit, then the pro rocks arkansas and indiana.......... as many as time allows, and how much/ bad i break :D

Looks good in John Deer colors. Sure are a lot of trucks getting painted like that now. We have a Cruiser running around Atlanta in that color. A Chevy in reverse (yellow body Green everything elses) and a Jeep with Yellow bars and bumpers.

Are you running something other than Currie rears shafts in that? Look like maybe Dutchmans? You say your getting spare rear shafts? How much and from whom?

Thanks, Phil:usa:

That is one Badassjeep guy! :D

Originally posted by badassjeepguy


well i broke one about 7 months ago..... i called a big warn distribtor, and he said there were some breakage issues so warn made spindles out of better material and they are heat treated..............to replace both with all new bearings and such they wanted 500 or so $ i said piss on that........ he said he sweet talked warn and made a deal.... if i pay shipping they will send me the enitre kit... i said for how much? he said for shipping... i said SHIP THE SOME BIATCHES and walla heat treated better alloy spindles :D


note.... they were not too happy bout 39 inch tires though....
Yikes! i am jelous of that but for 500 bucks my 30 dollar spindles will be replaced a few times,
ohh i love the new colors, but color of the green on the TR beadlocks just does not look right to me (i have to cretuiqe eveything :D )

Originally posted by TJpwr
Are you running something other than Currie rears shafts in that? Look like maybe Dutchmans? You say your getting spare rear shafts? How much and from whom?

Thanks, Phil:usa: i got curries in there now, goin dutchman for spares i believe 299 without bearings....

Why did you cut out therea fenders so much? Moving the axle back? Bigger tires?

Originally posted by welndmn

Yikes! i am jelous of that but for 500 bucks my 30 dollar spindles will be replaced a few times,
ohh i love the new colors, but color of the green on the TR beadlocks just does not look right to me (i have to cretuiqe eveything :D ) i wouldnt of got em if i was paying for em either! the green is all the same.... and are all clearcoated..... maybe the black of the tire makes it darker?




silly, thanks! :D

Originally posted by mudtruck44
Why did you cut out therea fenders so much? Moving the axle back? Bigger tires?

travel, and compression i was hitting bad.... links move the axle back under compression........... but yes when i do coil overs it will be 8 inches longer and more body will be removed... via sawzall..... :D

Whats this I hear? BAJG got a "deal" on some "more" stuff!!!!
That tears it Rob, like it or not your my purchasing agent! :D
Looking badass.

Looking so good.. its BADD.... what else do u expect!!!!!

hope to wheel wid ya again this summer

Originally posted by doctor_G
Whats this I hear? BAJG got a "deal" on some "more" stuff!!!!
That tears it Rob, like it or not your my purchasing agent! :D
Looking badass.


ba hahahaha do i get a percentage? :D

Originally posted by coachgeo
Looking so good.. its BADD.... what else do u expect!!!!!

hope to wheel wid ya again this summer thanks................ plan on goin to the big dog events......... garunteed a good time.......... ill post up some dates soon

NICE!!!:D

its nice BUT just a sugestion if you are going to compete or even if all you plan to do is
wheel it to its full potential.

I would add a bar across the front under the
wind shield and maybe over it as well this
would save you a lot of work if you were to roll
it. The cage looks real nice and all most would
protect the body in a roll over. im just saying
why dont you finish the great job you started?

you mean an exterior bar over the cowl? you may be right, but for some reason i didnt want that... hopefully ill be running without the windshield so i dont ruin that too... :D i have a spreader across the dash.......... the only thing id most likely hurt would be the hood, but the engine has tube over it just under the hood...

If those are 39s on a d44 then the CTMs will be put to the test!
Nice rig :beer:

yeahh, im sure they will be put to the test........... im hoping they stay toggether for this year somewhat.......... then things will be changing....................again :D

It's looking sweet....but International or Farmall red would "make you somebody". Good luck on the back, but if pain persists...I'll wheel it for ya'.:smokin:

All you need is a matching tow rig :D

http://www.blowsion.com/images/nike/hummer5.jpg

lol, my buddy refuses to paint the tow rig green................. :D

Yes you need a matching tow rig... maybe a red, and white you could be the life saver rock crawler???? rob give me a call today tomorrow???
looks good

Originally posted by Land Crusher
its nice BUT just a sugestion if you are going to compete or even if all you plan to do is
wheel it to its full potential.

I would add a bar across the front under the
wind shield and maybe over it as well this
would save you a lot of work if you were to roll
it. The cage looks real nice and all most would
protect the body in a roll over. im just saying
why dont you finish the great job you started?

It's hard to see from those pics but he has plenty of cage.
It should hold up to a hard roll.

BADASSJEEPGUY.. Looks better in green then it did in Black!
Now enough driveway pics... When you gonna GET IT?

Oh I forgot.. Lance said "Your never gonna Get It ! " :flipoff2:

Originally posted by Bert


It's hard to see from those pics but he has plenty of cage.
It should hold up to a hard roll.

BADASSJEEPGUY.. Looks better in green then it did in Black!
Now enough driveway pics... When you gonna GET IT?

Oh I forgot.. Lance said "Your never gonna Get It ! " :flipoff2:


ha ha ha thanks..... i think lance was talkin to you! bustin MY balls and your backing out of the little baby friendly crawler brawl.... :D GET IT! :D

:mad3:

Fuck you, I told you I wasn't going to compete. Why didn't you listen.

HARD OF HEARING?

Originally posted by Bert
:mad3:

Fuck you, I told you I wasn't going to compete. Why didn't you listen.

HARD OF HEARING?

HUH WHAT ? I didn't hear ya. badassjeepguy was saying something..........................again. :flipoff2:

I know why your not going to compete, your heard I got 38's this weekend. Well it's true I did. 38x12.5x15's tsl's .:D :D . Now it's time to get the sawzall out and do some cuttin.

Originally posted by Bert
:mad3:

Fuck you, I told you I wasn't going to compete. Why didn't you listen.

HARD OF HEARING? first of all i am jagging you because your stating i wont get it.... i thank you for the compliment on the cage issue..... now lets get one thing straight! i will post YOUR comment on about getting it pirate style! then you tell me again to fuck myself and that you never said you were gonna compete! get you shit straight belly!

pulled from previous thread.... posted by you belly!
.Rob, I am not pissed at you at all..... We are just talking shit...

Just like the Carnage on the Con Thread....

Oh yea, And I will compete on this easy wall thingy, too.
But I want CJ on my Team!

Who you pickin for your team Rob?

LETS GET READY TO RUMBLE! :Pirate style!

Edit: The only thing is, We have to do this after I get back from The Badlands over Easter weekend.. I want my Jeep in top form for the Badlands..

Are you coming? Craig? CJ??? Todd? end of quote!


now you wanna play fuck...... will play fuck fuck..... im done, you aint competeing... you backed out, its over... stop running your mouth like you some shit or back it the fawk up!

I did read that Belly up said he wanted CJ on his team that would imply competeing.... Rob some people talk better than they can drive! I know a couple of guys coming on 33 and 35 that will be giving you alittle run for the money!!! Bert you should try, maybe ride with PREMIERE once see how we ride... Not in brady puddle jumping although that is fun but alittle far from hardcore!!!!

belly is not competeing, thats his choice.......... i understand, as he understands why i rode his shit..... its all good lets have some fun... :D