Installing FP gauge..

[Po' riggity]

Ok, Im going to be installing gauges soon. My trucks lift pump just got replaced with the in tank pump update, under warranty because my old motor mounted lift pump went out. This means I don't have the banjo bolt on the old LP to use. Does this mean that I need to do something like buy the geno's billet fuel filter cap with the fitting in the top of it, as well as a couple peices of fuel line?
Scott

[Mechanos]

I used the banjo bolt (tapped banjo bolt) on the bottom of my fuel filter canister for a post-filter pressure reading on my '01 CTD. Does the in-tank update also eliminate the fuel filter canister? (I'm thinking it doesn't)

[nosliw]

i'm not sure if the 04.5s are the same, but i used a kit on my 98.5 24v from dieselmanor.com that came with a new banjo (with fitting on top) 36" stainless line, and isolator. s