Hi guys,
i wanted to ask you if you know something about installing
Lock-Right lockers in the rear and/or fron axles.
the car is standart with the original axels.
i have heard a roumor about LSD in the rear dif. is it true ?
thank you for your time.
Guy.
i have a Suzuki Samurai 86.
and the Lock-rights i want to install in the Jimny are installed now in the Samurai.
Guy
AIRZUKI
03-10-2002, 01:04 PM
the jimny ( LJ80?...) axles use a smaller ring and pinion and carrier than the samurai......the lock rights will not interchange.... the lockrights from an earlier truck ( pre -'85 ) will fit but you might need to exchange the side gears to make sure the axle shafts fit ( LJ's have larger splines on the rear axles than the sj410's do...).......
mud-magnet
03-10-2002, 02:48 PM
three words..........WELD IT NEWBIE:flipoff2: :flipoff2: :flipoff2: :flipoff2: :flipoff2: :flipoff2:
-MIKE
Root Moose
03-11-2002, 06:37 AM
Originally posted by AIRZUKI
the jimny ( LJ80?...) axles use a smaller ring and pinion and carrier than the samurai......the lock rights will not interchange.... the lockrights from an earlier truck ( pre -'85 ) will fit but you might need to exchange the side gears to make sure the axle shafts fit ( LJ's have larger splines on the rear axles than the sj410's do...).......
Actually, the Jimny is the modern "aero" looking machine. I think they have Samurai carriers?
He'd have to check.
r@m