|
Dychen 03-11-2002, 12:44 AM hey just wondering what would be good for the interior of my sammy. i want something that i can clean out with a rag and water, NOT something that requires a pressure washer. i would like to stay away from the stuff that feels like sandpaper, does that rubberized spray can stuff work good:question: any ideas are welcome, thanks jeeper111 03-11-2002, 01:25 AM Hell NO!!!!:eek: Dont ever use that rubberized spray!!! EVER!!! I used that stuff and it just turned to goo over time and I ended up having to put a vinal floor mat down to cover it up until I sandblasted it and rolled it with herculiner. I know that herculiner is not what your looking for but believe me that niether is that stuff. Just thought you would like to know. P.S. ?Sand is still falling out of my dash on 4x4 trips!:rasta: TODDK 03-11-2002, 01:52 AM I know a couple of guys that have rhino lining and it seams to work real well. I think I might eventually go with that. mytzlflick 03-11-2002, 04:26 AM what about paint? its cheap and hoses well? Old Scout 03-11-2002, 08:45 AM What's the budget? Can you prep all the area? A product like POR 15 works great, but don't fall for POR 15's sky high price. POR 15 is just a simple Moisture Cured Polyurethane. You can buy the same product for 50.00/gallon instead of 35.00/QT that POR 15 wants. Moisture Cured Polyurethane is a very common industrial coating for floors and equipment. Check with your local Industrial Paint supplier. Or use a search engine and find stuff like this: http://www.epoxysystems.com/416.htm | |