im trying to order brake lines to finish my full width conversion and am having trouble finding out the banjo bolt size for the caliper since i never had the original one im not sure the size and all the part stores around me are clueless to what a banjo bolt is so if anyone on here has a full width chevy 44 front end please let me know what size the banjo bolt is thanks.......if it helps its a 1976 chevy dana 44 8 lug axle.....

7/16-20
http://www.amstreetrod.com/

thanks dude link didnt work but size is what i needed thanks again

a banjo bolt has hole in it to allow the fluid through it, 2 small holes at the top, side to side. then a hole from the bottom to meet the cross hole at the top.

thanks dude link didnt work but size is what i needed thanks again
Are you blind or stupid? my post clearly shows that the bango bolt is 7/16 with a tpi of 20. In case your stupid TPI= threads per inch. :flipoff2:

The link worked when I posted it. :flipoff2:

Here are a few more for ya:
http://store.summitracing.com/default.asp?target=partdetail.asp?part=EAR-977504ERL

http://www.sdpc2000.com/catalog/741/products/106541/catalog-page.htm

http://38.113.97.153/products/Earls/Brake_Adapters.asp

https://catalog.foothilloffroad.com/product_info.php?products_id=184&osCsid=82c7255dc6d992087f0ff92548c9c712

http://www.behrents.com/Merchant2/4.19/merchant.mvc?Screen=PROD&Store_Code=BPW&Product_Code=EAR977504&Category_Code=earls-banjo-bolts

http://www.speedwaymotors.com/xq/aspx/display_id.953/qx/product.htm

hey man i got that part about the banjo bolt size and thread but when i clicked on the link it didnt work chill out