ok guys yet another one of my stupid questions.... but really.

ok pulled these numbers off the axle tube and off the diff tag i went to a web site that gave a basic breakdown of what the tag ment but didnt give me any details.

basicly i need to figure out what this is so i can call randy's and not be like uhhh duhhh i dunno.

heres what i got off the tube

11 8 7A1 603899 1

heres what i got off the tag

3 07 D81A AF
6038oo 1


i pulled this number off the corner of the diff i dont know if it means anything

C38330

i just wanna make sure i know what i have before i order gears and brake parts.

thanks guys again.

Uh, where did the axle come from? Dana? Ford? Chrysler? GM? Toyota?

In the immortal words of Dr. Evil:

"Throw me a fricken bone here!"

:flipoff2:

the yard said " came out of a 1 ton pick up i think a ford"

thats all i got.

here are a couple pics

http://www.jeeps-in-progress.com/pics/60/60a.jpg
http://www.jeeps-in-progress.com/pics/60/60b.jpg
http://www.jeeps-in-progress.com/pics/60/60d.jpg

Does it have Ford & the oval cast into it anywhere?

nope no ford stamped in the housing or on the tubes that ive seen

So far, the Ford axles I've seen have had it cast into the chunk or something. They also didn't have spreader holes like I mentioned on JU.

603899-1

call DTD give him this # and they can tell you evertything about the axle

Brian

i saw a couple of those laying around a yard down here, but everyone of them had D70 stamped right on the housing.

-russel

Could it have been 603989-1 instead?

CHRY Model 60 REAR 1980 - 1988.5 RAIL MAINTENANCE/D-200 & D-600

Originally posted by Oxjockey
Could it have been 603989-1 instead?

CHRY Model 60 REAR 1980 - 1988.5 RAIL MAINTENANCE/D-200 & D-600

I found the same thing, Dust. Can you check the number again?

What happended to this site???

http://www.patooyee.alloffroad.com/Dana/By%20BoMN.htm

I had all the info you would possibly need...


[edit] it moved to here:http://www.patooyee.com/Dana/By%20BoMN.htm

That looks like a 60 but could be a 70. What was the spline count on the axles?

I say 60 because the webbing looks a little light compared to my 70 but the photo of the carrier look more like a 70.

If its from a ford it's from a 78. However did it have 3.07 gears in it? Look on the side of the case, on top of the case split on the right side. On thing that has me confused is 3.07 I was thinking that only 61su had gears that high. But wasn't around in 78.

What is the date from the ring gear? It looks like it's from a ford, 3" wide spring pads.

Double check those numbers then punch them in here.

http://www2.dana.com/expert/wc.dll?DSD~deabill~2

It is a d60 from a 78 1/2 two wheel drive Ford with 3.07 gears and an open carrier.