|
squatch4x4 08-31-2005, 06:59 PM Iam taking out the 9.5 and putting a 10.5 in its place. While out Iam putting 488's in it with a locker. The question comes when I put the rear hubs back on, do I pack the rear hub bearings, or do they get oil from the rearend itself?? Joey D 08-31-2005, 07:04 PM No grease. They use oil from the axle. squatch4x4 08-31-2005, 07:09 PM So I just need to give it squirt of gear oil when I put it all back together. Thanks for the quick reply. trkklr77 08-31-2005, 07:14 PM do not pack the bearings means NO GREASE!!!! The Redneck 08-31-2005, 08:41 PM thats called gear oil the gear oil will lube it up no grease at all........ trkklr77 08-31-2005, 10:28 PM and to cover your other tuesday question it take 3.5 straight to the pumpkin, then when it all gets to the bearings you can cram the last of the gallon in. you can lift the front of the truck up and try and jam it all in that way. | |