View Full Version : QA1 3/4 and 7/8 *In Stock*
keithflux
09-01-2005, 01:02 PM
Inventory Reduction Sale!! Supply will not last long...
We have QA1 XM series in Stock for sizes 3/4, and 7/8.
XMR12 - 3/4 x 3/4-16 RH - $26.00
XML12 - 3/4 x 3/4-16 LH - $26.00
XMR12-14 - 3/4 x 7/8-14 RH - $30.00
XML12-14 - 3/4 x 7/8-14 LH - $30.00
303SS 3/4" mis-alignment spacers - $3.75
303SS 7/8" mis-alignment spacers - $4.75
303SS 3/4" safety washers - $3.75
3/4-16" Jam Nut RH - $1.75 (Or free with Heim purchase)
3/4-16" Jam Nut LH - $1.75 (Or free with Heim purchase)
7/8-14" Jam Nut RH - $3.75 (Or free with Heim purchase)
7/8-14" Jam Nut LH - $3.75 (Or free with Heim purchase)
1020 DOM RH 3/4-16" Tube inserts for 1" ID Tubing - $10.00
1020 DOM LH 3/4-16" Tube inserts for 1" ID Tubing - $10.00
1020 DOM RH 7/8-14" Tube inserts for 1" ID Tubing - $12.00
1020 DOM LH 7/8-14" Tube inserts for 1" ID Tubing - $12.00
Free Shipping for all Pirate Members
Call me, this free shipping is not on the site This is for Pirate Members Only....Keith 918-607-3328
keithflux
09-04-2005, 12:09 AM
:smokin:
keithflux
09-05-2005, 08:33 PM
:cool2:
JEEPRZ
09-06-2005, 06:15 PM
Do you have 7/8 x 14 tpi tube adapters, for a 1 1/8 ID tube?
keithflux
09-06-2005, 07:51 PM
Do you have 7/8 x 14 tpi tube adapters, for a 1 1/8 ID tube?
No sorry, I dont. But I am getting ready to do a run for 1.0" ID.
I typically do them for: 1.25" O.D./ 1.0" I.D.
1.5" O.D./ 1.0" I.D. I have never made any for 1 1/8....sorry
keithflux
09-12-2005, 11:17 PM
:skull:
chassisguy
10-09-2005, 07:20 PM
Do you have a tube adapter for 7/8 x 14 tpi for a 1 3/8 OD tube with a .095 wall?
keithflux
10-09-2005, 10:06 PM
Do you have a tube adapter for 7/8 x 14 tpi for a 1 3/8 OD tube with a .095 wall?
No sorry, I do not know anyone who makes for a .095 wall...None of my sources make them. What will you be using them for? links, drag link....etc. It is usually a general concensis that .095 is to thin so I doubt you will find anyone who has them.
You might have to have them made, but with the cost of that. It would just be cheaper to get 120 or 250 wall tubing...
sorry I could not help. Thanks, Keith
motorcitydak
10-10-2005, 05:19 PM
Do you sell the tube for these? I figure that it will be easier to buy it all in one spot. I need 2 3/4x3/4 rod ends(LH and RH), jam nuts, inserts and the tube. the whole thing needs to be about 58 in long, so a tube 5 ft. Its for a drag link.
keithflux
10-10-2005, 11:07 PM
Do you sell the tube for these? I figure that it will be easier to buy it all in one spot. I need 2 3/4x3/4 rod ends(LH and RH), jam nuts, inserts and the tube. the whole thing needs to be about 58 in long, so a tube 5 ft. Its for a drag link.
PM sent....Thanks Keith
Hosejockey
10-18-2005, 02:48 PM
can you get 1x1x14 heims
keithflux
10-18-2005, 06:12 PM
can you get 1x1x14 heims
Not anytime fast, I think MC has some in stock...
Tripod
11-17-2005, 12:39 AM
I need two tube adapters for 1.5" ID tube for 7/8x18 tpi joints. If you don't have 'em...can you point me to someone that might be able to help?
keithflux
11-17-2005, 08:14 AM
I need two tube adapters for 1.5" ID tube for 7/8x18 tpi joints. If you don't have 'em...can you point me to someone that might be able to help?
I dont have those in stock, but Larry (TJ Fan)over at MAD4WD has them....he makes them...Call them at 330.549.9082
keithflux
12-11-2005, 09:23 AM
New Holiday Prices, Check the first Post
Are the 3/4 or 7/8 strong enough for link ends on a 4000lb rig?
Pat98TJ
12-11-2005, 04:27 PM
Are the 3/4 or 7/8 strong enough for link ends on a 4000lb rig?
The 7/8 are....Keith will hook up up.:grinpimp:
keithflux
12-11-2005, 05:18 PM
Are the 3/4 or 7/8 strong enough for link ends on a 4000lb rig?
Yep, the 7/8 should be fine...they are beef1
Can I get a quote for 4 of the "package #2"s with shipping to 01913? Also, do you have any square tube inserts for these? It would be for a 1.5" ID square tube.
Thanks,
Ken
keithflux
12-12-2005, 10:28 PM
Can I get a quote for 4 of the "package #2"s with shipping to 01913? Also, do you have any square tube inserts for these? It would be for a 1.5" ID square tube.
Thanks,
Ken
PM Sent, Thank, Keith
m016324
12-22-2005, 07:39 PM
4 lh 3/4 4 rh 3/4 tube adtapter for 2" .250 wall tubing
keithflux
12-23-2005, 09:06 AM
4 lh 3/4 4 rh 3/4 tube adtapter for 2" .250 wall tubing
Prices are at the top....I dont have any tube adapters for 3/4 that fit 2" x .250 only 1.5 x .250....I dont know who makes that .....
a 3/4 end on a 2" tube l is over kill on the tube side.......the 3/4 rod end is only 1.75" wide...
keithflux
10-05-2006, 09:56 AM
Inventory Reduction Sale!! Supply will not last long...
We have QA1 XM series in Stock for sizes 3/4, and 7/8.
XMR12 - 3/4 x 3/4-16 RH - $26.00
XML12 - 3/4 x 3/4-16 LH - $26.00
XMR12-14 - 3/4 x 7/8-14 RH - $30.00
XML12-14 - 3/4 x 7/8-14 LH - $30.00
303SS 3/4" mis-alignment spacers - $3.75
303SS 7/8" mis-alignment spacers - $4.75
303SS 3/4" safety washers - $3.75
3/4-16" Jam Nut RH - $1.75 (Or free with Heim purchase)
3/4-16" Jam Nut LH - $1.75 (Or free with Heim purchase)
7/8-14" Jam Nut RH - $3.75 (Or free with Heim purchase)
7/8-14" Jam Nut LH - $3.75 (Or free with Heim purchase)
1020 DOM RH 3/4-16" Tube inserts for 1" ID Tubing - $10.00
1020 DOM LH 3/4-16" Tube inserts for 1" ID Tubing - $10.00
1020 DOM RH 7/8-14" Tube inserts for 1" ID Tubing - $12.00
1020 DOM LH 7/8-14" Tube inserts for 1" ID Tubing - $12.00
Free Shipping for all Pirate Members
Call me, this free shipping is not on the site This is for Pirate Members Only....Keith 918-607-3328
vBulletin® v3.7.3, Copyright ©2000-2008, Jelsoft Enterprises Ltd.