My waggy does not want to start when it is hot, the previous owner screwed up the vacuum lines pretty bad, does anybody have any idea where to get a good vac schematic online? This carb sucks its a 2 barrel and I have no idea how to screw with it yet, I'm used to fuel injection, any help as to how to get this peice started would be appreciated. Its an 88 Grand Wagoneer with the 360 and its my first waggy. Anybody know of fuel pump problems with this motor?

the vacume lines in thies vehicles are just stupid. on my 360 I took off the smog pump and welded all the tubes going to the headers. then caped all the vacume lines on the intake off. the only lines I run are the two for the auto trany the one vacume port on the passanger side of the carb and spliced thoes three into the one running to the distributer.

but I if you want to keep the electric choke or your cruse you will have to run thoes vacume lines too.

The best place to go for info on Grand Wagoneers is IFSJA - International Full Size Jeep Association (http://www.ifsja.org/cgi-bin/ubbcgi/ultimatebb.cgi).
Someone there should be able to help solve your problems.