Hi,

I'm looking for drive members that maybe an odd size. I need some that will fit a 1985 to 1987 110/90 front or rear hub but that will alow the half shafts to move 3/8 of an inch closer to diff. I'm putting an odd grouping of parts together and everything works exept that the half shafts are 3/8 shorter than what would be ideal. Anyone know if there is a maxidrive or other drive member out there that will do this? Thanks for any help.

I think early RRC hubs are narrower than the 110's. That might be worth a try. Post up the dimensions of the one you have and I'll check some hubs I have.