eb high pinion rear axle

[fordnut]

anyone running a high pinion 60 in the rear of their early bronco ; good /bad what is your setup and how do you like it im putting 60s front and rear in my early bronco and i was wondering if i should bother putting a high pinion in the back , it will probably have about 6 inches of lift or so with stoch length drivetrain. asny pics would be great too. thanks

[broncman]

Done a couple using 5.5" rear leafs (Deaver, nationals don't last). All were High pinion. One prorock 60 and one Terra. Have saw a bunch of low pinion. If you go low, shave it while you have it out. We put a traction arm mounted as close to the center chunk on both axles. The type with johnny joints in the rear and a shackle up front. Big tires twist up leaves real easy. A bronco can be 4 linked but it is hard to get the needed triangulation of the upper links because the inside of the frame is narrow but it can be done. A few people on here have done it.