Earl87gta
09-14-2005, 10:27 AM
Chevy SRW in TN
d60 was sand blasted down and painted black. It has 4:10 gears. Stock axles, it is some what apart and needs to be reassembled the local shop here wants 200 in labor to put the locker in and replace the gears seals every thing and reasemble it.I can have it done if needed the stock gears and carrier are still in the case so if you want to take the chance that they dont need replaced all you would need to do is put from the knucles out back on it and drive. It comes with new Bearings seals, for axles and hubs king pin rebuild kit Ring and pinion swap kit New Detroit locker and new break rotors. I have a set of calipers to use as a core but it will need new ones. Every thing needed is here. Except u joints, new calipers and Lock out hubs. Ask $1500 for it. It comes with over $1000 in new parts.
d60 was sand blasted down and painted black. It has 4:10 gears. Stock axles, it is some what apart and needs to be reassembled the local shop here wants 200 in labor to put the locker in and replace the gears seals every thing and reasemble it.I can have it done if needed the stock gears and carrier are still in the case so if you want to take the chance that they dont need replaced all you would need to do is put from the knucles out back on it and drive. It comes with new Bearings seals, for axles and hubs king pin rebuild kit Ring and pinion swap kit New Detroit locker and new break rotors. I have a set of calipers to use as a core but it will need new ones. Every thing needed is here. Except u joints, new calipers and Lock out hubs. Ask $1500 for it. It comes with over $1000 in new parts.