View Full Version : v8 with stock axles
supazuk94
09-19-2005, 02:38 AM
thats got your attention
ok this may be a vent .. but I understand that there are kits and what not and yeah people can search stuff ... maybe every board needs a FAQ with links
ok why i posted here I'd love to see some one off 2.0 installs using the 2.0 trany and maybe a kicker .. how bout hey this is what i did to wire it up .. and i grabed the radiator from this rig... sure the TT kit is cool and all and its not that i'm cheap I just enjoy seeing people fab stuff up
hey maybe some other wacky combos .. this is supposed to be the hard core site and we just tell every one ahhh yota this 16v that t case gears nothing new will come so let me see what you have fabed up .. hell let me see the booty fab too
and to the flammers :flipoff2:
Toolbox
09-19-2005, 06:37 PM
thats got your attention
ok this may be a vent .. but I understand that there are kits and what not and yeah people can search stuff ... maybe every board needs a FAQ with links
ok why i posted here I'd love to see some one off 2.0 installs using the 2.0 trany and maybe a kicker .. how bout hey this is what i did to wire it up .. and i grabed the radiator from this rig... sure the TT kit is cool and all and its not that i'm cheap I just enjoy seeing people fab stuff up
hey maybe some other wacky combos .. this is supposed to be the hard core site and we just tell every one ahhh yota this 16v that t case gears nothing new will come so let me see what you have fabed up .. hell let me see the booty fab too
and to the flammers :flipoff2:Dude, drop the pipe! That shit will kill 'ya. :laughing:
terrymac
09-19-2005, 07:24 PM
http://www.suzukiconversion.com/
supazuk94
09-19-2005, 07:30 PM
http://www.suzukiconversion.com/
I don't even want to see that... lightning is junk .. I was kidding about the v8 thing .. I was asking about home brew swaps and tech
DirtJumper
09-19-2005, 07:47 PM
http://www.suzukiconversion.com/
MY BURNING EYES!!!!
terrymac
09-20-2005, 09:23 AM
MY BURNING EYES!!!!
Hey, its a V8 with stock axles. The poster thought he was saying something impossibly stupid, but apparently there are stupid people in Florida.
Azrckcrawler
09-20-2005, 09:37 AM
thats got your attention
ok this may be a vent .. but I understand that there are kits and what not and yeah people can search stuff ... maybe every board needs a FAQ with links
ok why i posted here I'd love to see some one off 2.0 installs using the 2.0 trany and maybe a kicker .. how bout hey this is what i did to wire it up .. and i grabed the radiator from this rig... sure the TT kit is cool and all and its not that i'm cheap I just enjoy seeing people fab stuff up
hey maybe some other wacky combos .. this is supposed to be the hard core site and we just tell every one ahhh yota this 16v that t case gears nothing new will come so let me see what you have fabed up .. hell let me see the booty fab too
and to the flammers :flipoff2:
So take the ball and run with it. Compile all the links to motor swaps, format it and re-post it, then stick a link in the Suzuki Faq. The other option is to cry and wait till someone spoon feeds the info to you :shaking: Honestly I have had 0 problems finding the info you seek, I have been contemplating more HP for a while.
supazuk94
09-20-2005, 10:03 PM
blah blah bla i'm in a magizine ... jk/k ... no az wha i really meant was stuff not even always posted I really want to see some off the neat stuff we never do post
llike my marine radio instal kit in my dash ( ok i'll take pics some day) or caviler seats in a zuk how bout auto c/v drive shafts ... not nessacerly tech just ideas things you saw .. ju8st a general brain diarriah.. maybe i shouldhave said odd tech .. or things you did differant
and az for the record ... i have read every post on the zuk .. board .. ( i was under way for 2 years this was my four wheeling)
POWERSTROKEN
09-21-2005, 04:56 AM
http://www.suzukiconversion.com/ Hey now. I bought a Zuk from those @$$holes. I didnt even know about this board then. I took it up the @$$ and dry too. I bought a total P.O.S. The most expensive dumpster I have ever seen.
purevil71
09-21-2005, 11:31 PM
Hey now. I bought a Zuk from those @$$holes. I didnt even know about this board then. I took it up the @$$ and dry too. I bought a total P.O.S. The most expensive dumpster I have ever seen.
you weren't at the Melt a couple years ago getting ready to throw down with those guys were you?? :laughing:
We were gonna hit the trails, but that was so damn interaining, we decided to hang around camp for a bit!
kukukzuki
09-22-2005, 08:24 PM
i got a 73 datusn l20-b engine (2ltr) and tranny in my samurai (jus recently got). pretty much all booty fabbed in there, and the radiator is in the giant hole in the front end.
http://img84.imageshack.us/img84/8279/samuraiengine4ab3fz.jpg
actually im havn some problems with it, maby someone can help me. and before i get flammed, i have read the board, and googeled the problems and done my weeks of research and so far no progress. i hear its a sorta common swap, and if someone can help me i know this is the place.
theres a random miss in my engine, and only when i idle. i have a webber carb on there, and i suspect this is where the problem is. when we pour seafoam down the carb itl kick in and run jus fine, but the second it burns away it goes back to its random miss. the things we've done so far are checked for vacuum leaks, replaced every hose, got new contact points, and cleaned the carb. when i looked down at the jet jus random amounts of gas was bein poured out and im not sure how to remedy this. i thought cleaning it would, but nope. its my first car :grinpimp: and im loving getn to work on it but i would love to drive it more :D
*puts on newbie flame resistant suit* :laughing: any help for my problem would be great, thanks in advance. -Jason
LiftedSuzuki101
09-22-2005, 11:40 PM
Kukuk's with me, the motor had been sitting for like 5 years I want to say, outside of LCNW in Portland. The carb was uncovered except for the shelter by the hood so we donno if the jet is just gunked up or what. Its also got all new plugs, wire, cap, rotor, points, and everything like he listed so we're really not sure wtf is up anymore :confused: . Thanks anyone for the help -David-
Orionn
09-23-2005, 11:13 AM
Was the carb at least coverd with an air cleaner as well?
if not I would do a rebuild on it, to be safe.
Is the fuel pump good?
is the condensor good on the coil? or the coil for that matter?
LiftedSuzuki101
09-23-2005, 01:44 PM
Yea the coil should be in good shape, pulled it outa my dads zuk that I bought him... but it had been sitting so maybe I'll pull mine and throw it in his and see how that works. And no the carb wasnt covered at all cept by the hood, it was wide open, we also cant get the auto choke to work on it for some reason, maybe we hooked that up wrong. -David-
kukukzuki
09-23-2005, 11:53 PM
Well the fuel pump is good and like david said the coil should be good too. i was kinda wonderin about rebuildn it, but i have no idea how to do this :confused: , and i refuse to take it to a mechanic (so far) cause i dont have alot of money. thanks for the info though :) -Jason
supazuk94
09-24-2005, 01:28 PM
OK HOW ABOUT SOME HOME FAB COIL SET UPS? my buddy just did a 3 inch lift on his tracker and made a heim upper third link in the rear thats the kinda tech i'm looking for
the datsun engin swap is cool too
I'm working on a rear disk brake set up using 91 nissan stanza rear calipers ( cost me next to nothing
supazuk94
09-24-2005, 02:35 PM
i'm gonna say it i know the flame throwers will come out ...
lets hear your tim hardy storys like the post i did last year:
his hybrid axles
http://www.pirate4x4.com/forum/showthread.php?t=298165&highlight=hardy
his under drive shaft
http://www.pirate4x4.com/forum/showthread.php?t=119082&highlight=hardy
but not just him.. I just know that name get blood moving here
how bout your square drive shafts
sami trailers
you know stuff you are too embaressed to get flamed about..
NipperNutz
09-27-2005, 10:09 AM
kukuk, I belive the problem that you are having with you idle is in the carb. If i remember right that weber carb should have three jets. One of the jets is for idle pull it out and put the next size smaller in it. I hade the same problem with mine when i bought the carb. Also go get a haynes manual on weber carbs it will help you tune it up correctly.
vBulletin® v3.7.3, Copyright ©2000-2009, Jelsoft Enterprises Ltd.